Vaal

Take the DIMM out, check the MC is working OK, save all your work and samples to PC or card, put the DIMM back in, do a factory reset, reload your own data. That might do it. As long as the DIMM is seated correctly (both...

The only other thing I would mention is the bpm resolution. It really needs to be to two decimal places for best accuracy in my opinion. .01 of a bpm will make a difference eventually. (The MV has two decimal points of c...

The initial original tempo of the sample was 138.0bpm. When you timestretched it, the original tempo would be changed by the stretch operation. You have to recalculate the tempo and change the tempo 'sample parameter'. T...

Calculate and adjust the new original tempo parameter of the sample to reflect the timestretch operation.

There are only the two sets of insert effects for the whole MC-808. Plus the compressor/eq. The routing for the effects is global (affects all parts/channels). Also the effects types you choose for MFX1 and MFX2. The onl...

Part Parameter should only affect the part you are working on. If you use the remote keyboard option on when using the editor software, you can end up sending data to both the part you are working on and the part selecte...

Best thing is to do the factory reset and that will return the MC to factory settings, patches, etc. Take any CF card out before you do in case it's jammin the works. It takes a while. It totally clears the MC's memory b...

Check your levels are OK: turn the KRK input level control/s down to minimum, turn the volume of the MC up full and then bring up the levels on the speakers to your preferred listening level. That is the best setting for...

Make sure your cables don't lie next to any transformers or other hum inducing circuits. Try connecting the ground terminal on the back of the MC to the monitors ground terminal. Have you any other equipment connected? T...

Bear in mind that the MV is in many ways a ruggedized PC: it has a cooling fan and you have to press a shutdown button before you switch off - a power cut could be an expensive accident. A UPS is recommended. The MC's ar...