Joe P

I feel I should chime in. I have a dead F2 key on my FA08. I had replaced the rubber contact switches on my RD-700 and it was pretty easy so I opened up the FA08. Turns out the switches are part of the circuit board and...

Has anybody figured out how to make the organ rotary speed switch latchable via the modulation lever? My old RD700 did that except it used the pitch bend which mimicked the action of a Leslie half-moon switch. It was a c...

I've found "You and Luck", but have yet to start working with it. Any tips for fattening up the sound and making it more authentic? Regards, Joe

Plas, take a look at shift+part view for the lower part and see if you can shorten the decay, that might do the trick. Good luck, Joe

Thr, if you find the right tone, you might be able to get there by programming the attack on it. Just a thought, good luck.

MissysDad, Have you tried playing along with rhythm patterns? Page 36 in the manual. You can pick different drum sets, patterns, time signatures, bpms... One of the Studio Set parts is for rhythm patterns, I think it mig...

Roby, there is an OSC SYNC Lead that sounds a lot like that, stock patch. Regards, Joe

Just a shot in the dark here, but could the mix levels need to be saved with the song? Maybe you have to save the song too?

Blotchy, is it greyed out? I just did this. Go to the sequencer screen and change part 16 from pad to MIDI in the left-most column. It frees up that part. Regards, Joe

DK, Can you go through the PA and use your EV as a monitor? There are myriad ways to do that...