geppastro

1: Ability to import or convert sounds (patches/performances) from all previous Fantom models (Fantom, Fantom X, Fantom G etc.). That would require all the (multi)samples from the previous models (included all the expans...

The only drawback with this method is you cannot split the external board. But I set it up so all my splits are on the X7 and sounds that require the full keyboard are on the second board. Not exactly true. I use the ver...

Hello, I was wondering if it was possible to use ONLY ONE Sustain Pedal for Both Keyboards ? The setup is has follow : Fantom XA with a M-AUDIO 88 PRO Keyboard via MIDI , the PEDAL is connected to the ROLAND FANTOM XA. P...

Hi, I've downloaded Perplextor's Xlib free version here http://perplextor.de/?p=45 I've installed it ok, but I can't find any manual and I don't find the software to be self-explanatory. In short: I'm not able to find ou...

Many thanks Artemiy! Also, now I can't edit my old messages. I'd like to cancel the following now misleading phrase (this same thread, 1st page, 6th post from the top): "GM patches are "dummy" patches just for reference,...

Hi Paolo, Managed to get it to load (wrote a straight sysex delivery program and it loaded OK). Here is the original JV1080, a converted XV in XVl and Mid format as well as a Fantom version as a Mid file. Let me know if...

For moderators: please would it be possible to put this thread back as a sticky (like on the old forum)? I've updated the files linked in one of my previous posts (1st page, 6th post from the top): added JV1080-converted...

Sorry Paolo the file won't load into the XV Librarian and I tried to load it with a sequencer into my XV3080, but no luck. Looking at the Midi file, the sysex header uses ox6A as the model id. The XV series uses 0x42 so...

Hi Paolo, Sure. I'll give it a try. Royce Many many thanks here you are the JV 1080 GM patches in Midi file format (you should set on your XV 3080 the same device ID that I have on my JV 1080: device ID 17) Paolo

Hi Paolo Like the Fantom the XV GM presets are not accessible, unless you have been able to do it. If you have feel free to send then to me and I'll try to convert them. My conversion program only goes from XV patch bank...