doombilly

Output Assign on the Comp/EQ Window = Dry On the Routing Window for Part 6 = Mix I've tried it through MFX1 & MFX2 also. No sound. hello? does anyone know what I am doing wrong?

Output Assign on the Comp/EQ Window = Dry On the Routing Window for Part 6 = Mix I've tried it through MFX1 & MFX2 also. No sound.

Hi, I have a cowbell/percussion part I wanted to boost the volume more on. In the past I have just routed through the compressor using the MC-808 Editor. I seem to connect fine. I can remotely move sliders from my PC. Bu...

yeah, mostly... :))

Drums/Sequencer is a Roland MC-808. I'm the guy. http://www.youtube.com/watch?v=_8yjvNHhijA

Entirely possible. I know the RAM is supposed to effect the playback and the CF card is storage, but since all of the patterns we were having problems with were CARD #'s; I am inclined to think that the problem was the o...

You think there is something wrong with this new RAM chip? Page 141. *If the correct amount of free memory is not shown, it is possible that the memory is not being recognized properly. Turn off the power as described in...

Well, I copied the data from the CF card to my pc then to the new card. I tried some of the songs that had been dragging on the intro and the problem did not present. I play a bunch of songs through and it sounded good....

Well it should arrive today, so I guess I'll have the answer. I took off the underside plate and measured both the 128mb stick in there and the visible space between the ckt board and the spot where it looks as if the re...

Will a 43mm sized DIMM fit the 808? I'm sort of in a hurry, so I already ordered one from PNY. But I got this response from them today when I sent them the specs listed in the FAQ: *** Hello, Thank you for contacting PNY...