FA-06 / FA-07 / FA-08

How to keep the glossy FA surface clean?

Re: How to keep the glossy FA surface clean?

16 Sep 2016, 19:47
Myrk- wrote:
bennyseven wrote:
I have discovered this cool panel overlay. I wish they would produce some for the FA. Maybe we could order together and they will make some custom panels if we can gain sufficient demand...

http://www.synthgraphics.com/Roland_JD-XA_panel.html
I'm currently talking with him to print off a one-off I am designing for my FA-06 to match my JD-XA panels I got from him! If a lot of people are interested maybe we could do a batch run... though I've yet to design it. Give me a few days and I'll get it measured and drawn up!
Sounds great Myrk! Please count me in. Thank you so much! :-D

Re: How to keep the glossy FA surface clean?

21 Sep 2016, 07:43
So I decided to go down the route of doing my own faceplate for the FA-06 (I can do the FA-08 too, it just involves changing 1 number :P). Speaking with Synth Graphics I couldn't justify the costs involved to get this one done, especially as I live in Hong Kong (doorstep to China and cheap materials!)

Anyway, I measured and drew up the faceplates last night in CAD, and I've done the 1st paper mockup! All good apart from 1 volume knob was 1mm out, and a couple of switches out by 0.5mm, so I'll fix them and do another mockup of that particular panel for checking (by the way the grey colour is just so I don't have to print jet black, and I didn't stick down the paper for this photo so the fit doesn't look quite right in the pic). I'll work on a more glamorous typeface for the front (anyone know what font Roland uses for their fronts of their synths?), then get the prototype built up in China from the same materials as the JD-XA faceplate everyone loves. I'll post some more pics when I have that, and gauge an interest level for how many I need to get made up.
[attachment: 20160921_203153 (Small).jpg]
Attachments
20160921_203153 (Small).jpg (118 KB, 2489 downloads) · file not available

Re: How to keep the glossy FA surface clean?

21 Sep 2016, 08:13
Nice, even the grey base color is nice, nicer than the shiny, scratchy, unreadable surface I current have.

Sign me up for one FA06

Re: How to keep the glossy FA surface clean?

21 Sep 2016, 10:34
I may even be able to do custom colours... I'll let people know. If people want one send me a PM on here so I can tally some numbers later on.

Re: How to keep the glossy FA surface clean?

22 Sep 2016, 04:13
Looks good, count me in. I quite fancy a gold one (cheesy, I know). But I don't know if that will make the text too hard to read.

Re: How to keep the glossy FA surface clean?

22 Sep 2016, 04:43
Send me a PM if you are interested! It's easier for me to keep track then :)

Update on how it's looking: [attachment: FA06 Faceplate (Small) (Mobile).jpg] Haven't added on secondary functions or anything additional yet (gunna have a big gander through the parameter guide). Also not 100% on the font... it's close but not perfect (and that bugs me! haha). As for colours I'll let people know after the prototype - it will no doubt be a higher cost though unless a few people want the same colour. I may even look into doing a full customization service (custom coloured faceplates, screen protector [like on phones] and screensavers that match)... but early days yet.
Attachments
FA06 Faceplate (Small) (Mobile).jpg (35 KB, 2458 downloads) · file not available

Re: How to keep the glossy FA surface clean?

1 Oct 2016, 14:20
Possibility of coloured graphic overlays is looking reasonable... but I need to check the print quality. A quick mockup test for the 1st graphic panel which I'll get made up in the next week or so:
[attachment: Gundam Preview.jpg]
Attachments
Gundam Preview.jpg (250 KB, 2425 downloads) · file not available

Re: How to keep the glossy FA surface clean?

3 Oct 2016, 05:59
Looking good. If things get going with it you should start a new, dedicated thread.

Re: How to keep the glossy FA surface clean?

11 Oct 2016, 03:57
Hello Myrk-

Any news on your overlays for the FA06?

Cheers, Tom

Re: How to keep the glossy FA surface clean?

13 Oct 2016, 11:53
Not yet, still talking with suppliers. Seems to do the graphical style requires a completely different set of machines so for now it will just be the black standard variant (though I may be able to do colour variations of the simple design).

Re: How to keep the glossy FA surface clean?

24 Oct 2016, 07:31
Hello Myrk! I am Danny and Im new to this forum. Just purchased a second hand fa-06 and would like to know more about your product. I am living in Singapore, hopefully you can ship to singapore. I will pay for the extra cost :)

Re: How to keep the glossy FA surface clean?

24 Oct 2016, 07:39
Updated list:
So far, it looks like the following from this community are interested in custom protective FA06/FA08 overlays:

1) thedecider
2) bennyseven
3) JPWC
4) desernauta
5) cda
6) kayriss
7) endust
8) michaeldanny

can this be shipped to singapore? anyone knows the cost? thank u!

Re: How to keep the glossy FA surface clean?

25 Oct 2016, 04:44
Hey Danny,

Shipping isn't an issue, I'm located in Hong Kong and send other stuff around the world all the time (I design random products as a hobby and sell them off - working on high end electronic drumkits with integrated lighting at the moment, as well as a human sized Zaku Gundam wearable statue... next project may be a Midi-Masterkeyboard). More the issue is my current distaste towards Roland for not explaining that the FA-06 is a terrible external midi controller (but I won't go into that) which kinda put my search for suppliers on hold - hence the delay.

The design is fully done and tested on paper cutouts to work, just need a supplier to make it. The full graphic panels are off the cards for now as most suppliers are quoting insane money, even if it's screen printed. I'll have a look when I'm back from travelling next week as it seems there's a fair few people who'd want it, and would be a shame to put all the effort to waste!

Re: How to keep the glossy FA surface clean?

25 Oct 2016, 04:55
michaeldanny wrote:
Updated list:
So far, it looks like the following from this community are interested in custom protective FA06/FA08 overlays:

1) thedecider
2) bennyseven
3) JPWC
4) desernauta
5) cda
6) kayriss
7) endust
8) michaeldanny

can this be shipped to singapore? anyone knows the cost? thank u!
Please don't forget to add me to this list!

tomkitel

← Back to FA-06 / FA-07 / FA-08