Hi Ferran,
Please see Page 66 of manual:
Press Edit and then Edit pro. Go to TMT page you will see the velocity parameters for each one of 4 tones.
From manual (Page 66):
Creating a Patch
Key Fade Upper
(Keyboard Fade Width Upper)
This determines what will happen to the tone’s level when a note that’s higher than the tone’s specified keyboard range is played. Higher settings produce a more gradual change in volume. If you don’t want the tone to sound at all when a note below the keyboard
range is played, set this parameter to “0.”
Value:
0–127
fig.06-027.e
TMT Velocity Control
(TMT Velocity Control Switch)
TMT Velocity Control determines whether a different tone is played (ON) or not (OFF) depending on the force with which the key is played (velocity).
When set to “RANDOM,” the patch’s constituent tones will sound randomly, regardless of any Velocity messages.
When set to “CYCLE,” the patch’s constituent tones will sound consecutively, regardless of any Velocity messages.
Value:
OFF, ON, RANDOM, CYCLE
Instead of using Velocity, you can also have tones substituted using the Matrix Control (p. 66). However, the keyboard velocity and the Matrix Control cannot be used simultaneously to make different tones to sound. When using the Matrix Control to switch tones, set the Velocity Control parameter to “OFF.”
Velo Fade Lower (Velocity Fade Width Lower)
This determines what will happen to the tone’s level when the tone is played at a velocity lower than its specified velocity range. Higher settings produce a more gradual change in volume. If you want notes played outside the specified key velocity range to not be
sounded at all, set this to “0.”
Value:
0–127
Velo Range Lower (Velocity Range Lower)
This sets the lowest velocity at which the tone will sound. Make these settings when you want different tones to sound in response to notes played at different strengths.
Value:
1–UPPER
Velo Range Upper (Velocity Range Upper)
This sets the highest velocity at which the tone will sound. Make these settings when you want different tones to sound in response to notes played at different strengths.
Value:
LOWER–127
If you attempt to set the Lower velocity limit above the Upper, or the Upper below the Lower, the other value will automatically be adjusted to the same setting.
When using the Matrix Control to have different tones played, set the lowest value (Lower) and highest value (Upper) of the value of the MIDI message used.
Velo Fade Upper (Velocity Fade Width Upper)
This determines what will happen to the tone’s level when the tone is played at a velocity greater than its specified velocity range. Higher settings produce a more gradual change in volume. If you want notes played outside the specified key velocity range to not be
sounded at all, set this to “0.”
Value:
0–127
