Regular

c24kgold

Recent posts

FA-08 as a 16 channel controller in FA-06 / FA-07 / FA-08 · 23 May 2014

I currently own a Fantom G8 and I use it along with NI Komplete 9 Ultimate as a controller. I am thinking about selling my G8 in exchange for a FA-08. I like the new sequencer, smaller design and Integra sounds. However,...

Re: Pushing the I7 to the limit! in Integra 7 · 27 Sep 2013

Ok just tried the pad mode and it works FANTASTIC! Thanks again! BTW sorry to derail the thread a little with that everyone. Great! Not a problem, we are glad that you were able to make it work.

Re: Pushing the I7 to the limit! in Integra 7 · 27 Sep 2013

I use Pad Mode 10) MIDI TX SW to choose which channels are transmitted to my Integra-7. C24kgold may be doing the same. I have it to where my fantom does not transmit any Program Change Data. All that is controlled from...

Re: Pushing the I7 to the limit! in Integra 7 · 23 Sep 2013

Wondering what you use for an 8 port midi box? In the market for something like that. SparkyCanada I would suggest the Motu. It is very stable for running a lot of signals through it and it is programmable.

Re: Pushing the I7 to the limit! in Integra 7 · 23 Sep 2013

Are you using SN Patches, SRX or a Mix of the two? I use a mixture of both. For example, for our strings I use the SN Strings Sect. as a base over the whole span of the keyboard. I then mix in, at a slightly lower volume...

Re: Pushing the I7 to the limit! in Integra 7 · 23 Sep 2013

Could you tell me how I can save live sets on the fantom to load straight to the 16 channels I have set for the integra? Mine always loads to internal sounds, and I have to scroll down to the external channels. I have ea...

Re: Pushing the I7 to the limit! in Integra 7 · 23 Sep 2013

there are a number of straight 8 port midi boxes, but the best midi box by far is the motu express xt . you can create setups for any amount of cross connect ..and once programmed, no computer is required. Yes the Motu i...

Pushing the I7 to the limit! in Integra 7 · 16 Sep 2013

I just wanted to find out how far some had pushed the limits of the I7. For example, we have a fairly large band which has 3 keyboardists. We also have a percussionist with an Octapad and Axiom 25. We also have a guitari...

Re: Integra 7 Brass Sounds in Integra 7 · 7 Sep 2013

I have tried using a very short delay (and it helps), but it still seems to be missing the fullness. With the Strings Section (which I realize that it is SN) you can hear multiple sounds that make it up and it adds depth...

Re: Integra 7 Brass Sounds in Integra 7 · 7 Sep 2013

Have you tried the ExSN5 expansion? No sections though, but still. Yes, and they are very similar to the SN Solo Horns that are already on the main bank. I love most of the individual solo horns (The trombone and Bari Sa...

Topics started