Fantom-S and Fantom-X

X6 and external Masterkeyboard

X6 and external Masterkeyboard

10 Sep 2006, 05:55
I tried to use my Fantom X6 together with an external Masterkeyboad (which is a Kurzweil PC88) to have a second key manual. Dispite the huge features of the PC88 (4 zones etc.) my intention is to manage all
setups within the X6 and only play the PC88 on channel 1.


I programmed several parts with different zones on the X6. Two zones (out of 6) where assigned to Midi Channel 1.

Now is the buggy: When I play on the PC88 on Ch 1, the two desired zones respond. So far so good. But my individual keyboard zone assignment on the corresponding X6 part is totally ignored. In my example, both zones are responding over the whole manual !

Wouldn't it be possible to play the X6 parts from external just within the programmed key-zone ? Why is the X6 ignoring my key-zones when playing from an external Masterkeyboard ?

Any suggestions ?


Greetings,
Thorsten

-----------------------
my settings:
setting part-Kb-Switch on/off has no impact on this behaviour
system/usb/midi is set to storage
system/midi/remote is set to no

Re: X6 and external Masterkeyboard

10 Sep 2006, 08:57
Hi,
I dont have my fantom yet, but dont metter. I think you the masster keyboard you must select différent Midi channel, is how Midi work, then on the fantom select the part channel you want to listen.

I did this on motif, work well :) Try it ;-)
Fantom X7 with SRX 06, 03, 01, 09. VS-2000CD-VGA. Boss GS-10. Guitar Coox Gibson SG Standar. Boss DR-880(for Sale )

Re: X6 and external Masterkeyboard

10 Sep 2006, 10:46
Also I for get ! Look on page 231 of the manuals they talk about it !

Remote Keyboard Sw (Remote Keyboard
Switch)
Set this parameter “ON” when you want to use an external MIDI
keyboard instead of the Fantom-X’s keyboard. In this case, the MIDI
transmit channel of the external MIDI keyboard can be set to any
channel. Normally you will leave this parameter “OFF.”
Value:
OFF, ON
Turn this “ON” when you want to control the Fantom-X from
an external MIDI device when performing with the Arpeggio or
RPS function.
Fantom X7 with SRX 06, 03, 01, 09. VS-2000CD-VGA. Boss GS-10. Guitar Coox Gibson SG Standar. Boss DR-880(for Sale )

Re: X6 and external Masterkeyboard

10 Sep 2006, 15:30
o, thats what I've been looking too with my juno and FP5.
thanks

Re: X6 and external Masterkeyboard

10 Sep 2006, 16:04
Nikita, thanx for quick reply.
But not to fear the worst, i think that could not solve my problem.
As you wrote, switching the Remote Kbd Switch to ON enables the ability to receive any data for a part on its specific Midi channel. Even if you use Fantoms own or external keyboard.
I tried all combinations on that switch.

Your solution is right, indeed.
But for me, Remote KBSwitch "doubles" the Master Keyboard to the Fantom like an enhanced Omni-Transmitter -> not what I want.
Implement different Midi Zones on external Masterkeyb -> not what I want.

Why will Fantom ignore the part's key range settings when playing from external on same Midi channel ? It doesn't, if playing from internal keyboard. In my understanding it should not matter from which Midi device events are sent, even internal nor external.
Can anyone say, this works as required and my approach to use that kind of "Master-Keyboarding" is unusual ( I only want to save effort in programming my Master and keep "all" in the Fantom). Or should I go to the XBugs-page ?

Help,
Greetings,
Thorsten Kisters

-------------------------
Try it:
Use Performance "User 1" (Seq Template) and set the Part 1 ("So true...") Keyboard Range to i.e. "C5 - C6". Remember, Part 1 will have by default Midi Channel 1 assigned.
Play on Fantom Keyboard a C5, nice piano sound, isn't it.
Play a C4 Note. Nothing to hear, because out of range.

Now, play the external Masterkeyboard on Channel 1 a C4 note and part will respond with a nice piano sound. But it is out of the zone !
Thus, you can play all the claviature arround and Part 1 will allways respond.

Re: X6 and external Masterkeyboard

11 Sep 2006, 02:25
Well I can't try I dont have my Fantom yet. But I will soon, to late for you I think !

But maybe this I a pure Midi issue. I see on some other place, peeps use external SEQ or a PC, then for sure ALL channels must reponds to there CH. On Fantom I see many place to set up CH rec/trx. maybe is about this.

And yes "Remote Keyboard Sw (Remote Keyboard Switch), look like to be an Omni way.

I can't help more without the Fantom :( So next time, because I will use this for the pedals stuff :)
Fantom X7 with SRX 06, 03, 01, 09. VS-2000CD-VGA. Boss GS-10. Guitar Coox Gibson SG Standar. Boss DR-880(for Sale )

Re: X6 and external Masterkeyboard

11 Sep 2006, 08:46
The reason why you hear de sound no matter key you press on the kurz, is because the key range on the kurz probably is set to their minimum and maximum levels.
The key range assigned on the fantom, only affects when you play the fantom itself.
Remember that is the kurz who controls de fantom. Try this: define the key range on the kurz and leave the key range on the fantom to their minimum and maximum levels.

Hope this can be helpfull.

Re: X6 and external Masterkeyboard

11 Sep 2006, 11:12
Ok, so you don’t want to turn the Remote Keyboard Switch to “on”. I don’t like having to do this either but it is the only way to get the Fantom to accept certain midi information and really treat it like it was being played locally such as when using RPS functions as Nikita pointed out.

Benny-de, the fantom has a way of treating some performance settings and some patch settings in some unpredictable ways. For instance, when I set a patch to solo and then include it in a performance I then have to go to the MIDI tab in the performance and set it to solo or else it is treated as poly. All keyboards have their way of seeing things.

Ok, so what I found out is that the performance keyboard range data is the maximum and minimum levels that a patch assigned to the part can be played from the local keyboard, or a midi board if the Remote Keyboard Switch is set to “on”, assuming that the underlying patch is set to play over that range. If I understand you correctly, then I think that what you want to do is create a new patch and edit the patch to have the upper and lower range set within the patch itself. Then assign this new patch to the part in the performance that you want to play from the second keyboard and you will see that locally or remotely the part now only plays in the range that you have set in the patch.

I hope that helps.

Re: X6 and external Masterkeyboard

12 Sep 2006, 03:44
Now I've learned the two ways: programming the Kurzweil with zones or programming the underlying patches with inividual key range.
I should start to use my FX6 'as it is' and nevertheless, it is a great workstatiion.
Thanks again for your reply.

← Back to Fantom-S and Fantom-X