Fantom-S and Fantom-X

Trying make a windblow-like sound patch

Trying make a windblow-like sound patch

18 May 2006, 01:35
Hola!

Don't know how to call it, but I wonder about that dramatic windblow-like sound which often heard on House tunes.
Especially often heard at the middle breaks, gradually voluming up until the hook comes back in...

I can't find the patch in Fantom.
Maybe available in other keyboards.

So I wonder if I can just create that on my Fantom.

The key is, the sound never sounds like an instrument.
Rather like natural wind or noise..
So, hopefully I can create one using some noise waves, applying a slow TVA envelope?
That's my guess. I'm kinda new to patch creating.

If somebody knowing anything, gimme a clue!

To create a patch from the ground up seems tuff, but would be worth it in terms of learning the art of synthesis...



Big up!
So mi go so den...

riddimski

Fantom-X6 Audio Track Expansion with SRX-08, -09, and -98

nuff respect

Re: Trying make a windblow-like sound patch

18 May 2006, 02:12
Hi there.

I'm not familiar with the sound you're speaking of as I don't listen to that style of music often, however, I have experience in developing special effects sounds on the Fantom (and earlier XP-80) synths. Perhaps you could provide an MP3 sound clip of what you're talking about and I might be able to give you some tips on how to reproduce it.

Regards,

Nathan Sheldon
http://www.nathansheldon.com/
Regards,

Nathan Sheldon
http://www.nathansheldon.com/

Re: Trying make a windblow-like sound patch

18 May 2006, 02:45
Initialize the patch, in Wave tab set the waveform to White Noise or Pink Noise, then go to the TVF tab, set filter to LPF, cutoff to 50-60, resonance to 80-100, then to TVF Env tab, set attack to 90-100 and envelope depth to 40-45. Now you should have a wind-like sound with evolving filter cutoff, you may adjust the filter cutoff/resonance, envelope attack and depth to suit your taste.

Re: Trying make a windblow-like sound patch

18 May 2006, 03:27
Thanks, yall!

nsheldon,

Okay but it may take a little as I don't have a place on the web to place my files.
Gotta find some free space.


Art,

I didn't thought about using filter.
Yeah, maybe this is the thing.
This envelope setting makes its sound brightness changes gradually?
I'll give it a try later.



Big up!
So mi go so den...

riddimski

Fantom-X6 Audio Track Expansion with SRX-08, -09, and -98

nuff respect

Re: Trying make a windblow-like sound patch

18 May 2006, 09:27
"This envelope setting makes its sound brightness changes gradually"

Yes.
have a listen to the sample c.d that came with your fantom.there is a sound on it that could be what you want.Its agradual build up woosh sort of sound.

Re: Trying make a windblow-like sound patch

19 May 2006, 11:11
Hi Andy.

I'm not sure which member you're addressing. As for me, my Fantom-X8 bought new when first released did not come with any sample CDs. It came only with a driver CD and a note from Roland explaining that there was no sample CD included despite what the manual said. Perhaps later revisions of the X8 packaging included this software.

Regards,

Nathan Sheldon
http://www.nathansheldon.com/
Regards,

Nathan Sheldon
http://www.nathansheldon.com/

Re: Trying make a windblow-like sound patch

22 May 2006, 02:45
Thanks Andy.
I'll have a check on it.
Yeah, my fantom-x came with a sample CD from some german name company. That was totally outta my mind since couple of checks at first.
I should have it somewhere...

No, its not a software, nsheldon.
Just a CD with a bunch of samples in it.
So you didn't get it somehow.
I got it when I bought my fantom 9 months ago.

I tried the patch making over the weekend, and I was somewhat successful following the suggestions by Art and a few more tweaking, except, there was an unwanted low cyclic sound...

I thought it is caused by LFO. And since there is no such thing as LFO switch or LFO On/Off parameter (am I right?), I set both LFO1 and LFO2 to Step and made no step, just flat.

But I still hear the unwanted cyclic sound...

So I applied another filter, HPF using the patch structure where I can use 2 filters to cut the cyclic sound in lower frequencies. It was successful, however, then the total sound became kinda weaker due to the loss in lower frequencies.

I figured, the cyclic sound is caused by the noise wave because the wave is played over and over while I hold the key?
I tried both white and pink noise waves and I hear the cyclic sound in both cases.

Or, is there any other parameter which is likely to cause that?



Big up!
So mi go so den...

riddimski

Fantom-X6 Audio Track Expansion with SRX-08, -09, and -98

nuff respect

Re: Trying make a windblow-like sound patch

22 May 2006, 08:52
Hi riddimski.

Yes, when the Fantom-X line first came out about 2 years ago (when I bought it) Roland did not yet have the sample CD available and thus did not include it with the first run of Fantoms. It wasn't an oversight in packaging (as they included a pre-printed note indicating the lack of a sample CD) but a lack of supply (or other some such excuse).

As for the cyclic sound, yes, that's probably the result of the white and pink noise samples themselves. It seems that Roland's white and pink noise samples on the Fantoms have some noticeable artifacts in them. This was not the case in the Super JV and XV synth lines. I noticed the noise myself in the Fantom-X when I first got it, though I considered it rather benign in the scheme of things. If the cycling is exceptionally troubling for you, you'll probably want to find a sample (or create one yourself) which lacks this characteristic.

Regards,

Nathan Sheldon
http://www.nathansheldon.com/
Regards,

Nathan Sheldon
http://www.nathansheldon.com/

Re: Trying make a windblow-like sound patch

22 May 2006, 22:19
You guys keep talking about this white noise and pink noise. I have an X6 with V2.0. I initialize a patch, hit patch edit, go to the wave tab, and there's nothing there about white noise or pink noise. The terms white noise and pink noise also do not appear in the X6 manual, at least not in the index section at the back. What exactly are you guys talking about?

Re: Trying make a windblow-like sound patch

22 May 2006, 23:45
Whasup Echo

There are lots of waveforms in the Fantom's ROM and you can create your own patch using them.
That's what its all about.
The Pink and White Noize that we talking bout are the names of those.
You got a booklet as Waveform List or something besides the manual. Take a look.



Big up!
So mi go so den...

riddimski

Fantom-X6 Audio Track Expansion with SRX-08, -09, and -98

nuff respect

Re: Trying make a windblow-like sound patch

23 May 2006, 00:14
Echo: please check out the Fantom TweakBook, it will help you learn many great things about your board.

Re: Trying make a windblow-like sound patch

23 May 2006, 00:53
Hell yeah!!
Nuff respect Art, thats the ultimate source of knowledge for all the Fantom tweakers..
Highly recomended!



Big up!
So mi go so den...

riddimski

Fantom-X6 Audio Track Expansion with SRX-08, -09, and -98

nuff respect

Re: Trying make a windblow-like sound patch

23 May 2006, 15:57
Artemio, acutally I downloaded it a long time ago and got stuck in your first example. It said something about initialize a patch and select a sine wave. Right there I was done. My waveforms all have names like AC PNO and stuff. There are like over 1100 waveforms in there. I looked through a bunch of them but I guess I'm not patient enough to look far enough to find "sine wave" or "white noise"?

Re: Trying make a windblow-like sound patch

23 May 2006, 16:01
Echo:

In the "before we start" section, look at the wave numbers for sine, saw, etc.

← Back to Fantom-S and Fantom-X