Fantom-S and Fantom-X

Sysex via USB Midi -> Update novation synth module OS

Sysex via USB Midi -> Update novation synth module OS

14 Feb 2006, 14:52
Hi,

I'm trying to update the OS on a Novation KSrack synth via my Fantom X7.

Basically - they are set up like this:

PC ----USBMIDI---> Fantom -----(midi out)-----> Novation KSR

I have the OS update (a .dmg file - sysex os update) on the PC, and am trying to send it to the Novation KSR via the Fantom. I've got the fantom set up to do USB-MIDI THRU (which should send the incoming midi data straight to the output) but the Novation KSR says it isn't receiving any data.

Any help would be much appreciated.
I've also tried sending a proprietory data stream but the Novation KSR said "Packet Error" which is why I'm using the sysex update...

I realise this isn't entirely Fantom related, but I think the signal is getting lost somewhere in the Fantom, or I haven't routed it properly :) Please correct my faulty wiring!

Many thanks,

Padraig

Re: Sysex via USB Midi -> Update novation synth module OS

14 Feb 2006, 15:56
I see where your going wrong, diconnect the cable from midi OUT on the fantom and connect it to midi THRU on the fantom
since its THRU that repeats the data going to midi IN(usb),
Midi OUT is only LOCAL.
Make sure usb thru is switch on in the fantom.
should look something like this..


PC ----USBMIDI---> Fantom -----(midi thru)-----> Novation KSR

I have a novation KS4 but i have not done any update since it came with the current OS

Hope this helps.


X-Bugs.org
(Become part of the solution)

Results not Excuses




QuinnX universal tranlator below:-
(lets not be misunderstood)

!!!!!! Emphasis not anger
!!?? Confusion or Stupidity
ABC are you getting the point
&*$% Anger (but rarely seen)


Fantom-X6 with Audio Track Expansion (OS 2.0)
Windows 2000
Intel P4 2g
512mb



[img]http://www.geocities.com/cpmul/myconfig.jpg[/img] - [img]http://forums.rolandclan.info/pub/attach/116700-UT.jpg[/img] - [img]http://www.geocities.com/cpmul/filesystem.jpg[/img]






Listen to GlassSlipper


X-Bugs.org

Results not Excuses

My Setup

Re: Sysex via USB Midi -> Update novation synth module OS

14 Feb 2006, 16:17
Thanks for your reply :) The KS and Fantom go very well together don't they - they fill most niches nicely...

I've just tried using Thru (which seems logical, and was my first attempt), but the KSR no longer even gives the "Packet Error" - It simply sits there waiting to receive the OS update...

I thought the Thru must be the right way, but according to the Fantom Manual (and the diagram on the dispaly), USB-MIDI THRU routes all incoming USB midi messages to the midi out socket - the THRU doesn't appear on the diagram at all!?
I'm at a loss - perhaps it isn't meant to be. I think it must meant that the fantom is filtering something out...

Any other ideas? Your reply was much appreciated.

PC--->USBMIDI--->Fantom--->(midi thru)---> other MIDI device

26 Oct 2007, 22:26
I am trying to send sysex data through the fantom X6 to my pedalboard but cant get it to work. I has searched around here then found this thread but it doesnt look like it ever worked properly. Has anyone been able to send data from their PC through USBMIDI of the Fantom to another MIDI controller?

Re: Sysex via USB Midi -> Update novation synth module OS

2 Apr 2008, 07:17
Quinx,

are you positively sure that the Fantom X THRU MIDI port would repeat any data going to its MIDI IN Port?

I've been trying this with no success. The data I am sending is "Send Bank"from my Cakewalk's SysEx View, and the data itself is the setup and user patches for my TC Helicon VoiceWorks.

Aside from turning MIDI THRU to ON, is there anything else I should check to make it work? I have the PC connected to the Fantom X7 via USB and the Fantom connected to the VoiceWorks via MIDI cable.

← Back to Fantom-S and Fantom-X