Fantom-S and Fantom-X

Realtime Control woes

Realtime Control woes

4 Jan 2006, 22:51
Hey All,
My Realtime Control knobs just don't work. =(

Whether I'm in Patch or Layer modes, I get nothing. I'm on my second X6 keyboard. I took the first one back and the Roland guru chalked it up to bad knobs.
I know that if you press Shift/Jump and then turn a knob, you can see what the setting is for that knob. I know this because I did it on their floor model. This also tells me that the knobs are receiving and sending info.

I also reset the keyboard to Factory settings but no luck.
Do you guys see this behavior alot? Am I missing something as far as a setting?

Thanks,
Eric

Re: Realtime Control woes

5 Jan 2006, 00:18
Eric,

When you are in Mixer mode, do you knobs work? You should be able to control 4 Parts at a time, 1 for each knob, using the Cursor buttons to change between Volume, Pan, Reverb, etc.

Let us know if they also don't function in Mixer mode. Then perhaps taking a look at how they are assigned is next.

Bassman
Bassman

Re: Realtime Control woes

5 Jan 2006, 03:14
No, they don't work in mixer mode.

To check the knob assignments, I held down Shift/Jump and pressed the button that toggles the Realtime Control knobs between filter, arp and assignable.
This took me to the 'Control Setting' screen with the 'Knob' window open. Here are the current assignments:

Knob 1 Assign - MASTER LEVEL
Knob 2 Assign - AFTERTOUCH
Knob 3 Assign - CC02:BREATH
Knob 4 Assign - CC04:FOOT TYPE

Hopefully this is the information you were looking for in the next step.

Thanks for you help with this!
Eric

Re: Realtime Control woes

6 Jan 2006, 01:30
In reading the manual, I should be able to press 'Shift' and turn a knob to see the knobs current settings. This is not happening and if I can't do this, I wouldn't think I'd be able to do anything with that knob and this is happening with all of the knobs.

I'm going to update the X6 System to 2.02 to see if that will jog anything. I'll let you know what I find.

Re: Realtime Control woes

6 Jan 2006, 10:43
Eric,

What OS level are you currently at?

Bassman
Bassman

Re: Realtime Control woes

6 Jan 2006, 11:02
As of last night, I was running 2.01. I am now at 2.02 and this didn't help any of the problems I'm encountering.
Do my knob assignments look correct? Is there anything else you can think of?
I really think it's a hardware issue because nothing happens when I hit 'Shift' and turn one of the knobs.

Eric

Re: Realtime Control woes

6 Jan 2006, 11:15
Your assignments look OK. I'm beginning to think your X is broke. . . . . . but you say this is the second one with this issue?

Bassman
Bassman

Re: Realtime Control woes

6 Jan 2006, 11:37
Yeah, this is the second one that has the exact same problem. I'm gonna go back up there tonight and see if I can get another one. I'm sure I'm a pain in the ass to the salesman but it's not my fault it's broken. I just want one that works!

Re: Realtime Control woes

6 Jan 2006, 11:40
Two Fantoms with the exact same problem, and it's an odd problem at that. Me thinks there may still be something else here. Are there ANY external devices or pedals connected to your X in your setup?

Bassman
Bassman

Re: Realtime Control woes

6 Jan 2006, 12:03
I thought about that too! I disconnected my usb cable, sustain pedal and my quarter inch jack going to my mixer. The only cable I have plugged in is my headphone jack.

Also, maybe this is related or maybe not. But when the keyboard finishes booting up and it goes to the grand piano patch, the sound is greatly altered. It's like there is no attack at all. I have to switch to the second patch, then back to the first to get the piano patch back.

This also happened with the first keyboard, but not all the time. With this one, it seems to happen all the time.

I've been out of the keyboard scene for about ten years and am just getting back into it. Keyboards had bugs back then and I'm sure they still do today. These bugs I'm running into seem bigger than the bugs I was dealing with before.

Eric

Re: Realtime Control woes

6 Jan 2006, 12:25
Eric,

This is a strange one. I'm not sure what's next and don't have any other immediate ideas. I don't recall any other symptoms like this one described in any prior threads I have come across. It doesn't sound like some of the motherboard issues with some of the earlier Fantoms. . . . .

Take it back and have your dealer swap you out with a machine you try out BEFORE you leave the store. Verify its operation, then do it again when you get home.

Bassman
Bassman

Re: Realtime Control woes

6 Jan 2006, 13:43
Good idea. I was going to check it out before I left the store. I spoke with the manager of the store and after explaining my situation to him, the only explanation he had was that maybe there was a bad batch of X6's that went out. He's going to have Roland send out a 'fresh' hot off the assembly line X6.

Re: Realtime Control woes

6 Jan 2006, 16:18
Let us know how it goes.

Bassman
Bassman

Re: Realtime Control woes

17 Sep 2006, 00:52
I'm also having realtime control knob issues. Mine are a little different tho.

I get knob 'drift'. If I move any of the knobs to any position other than 'full on' (clockwise), they will drift 'up'. This is easiest to see in the mixer screen with the knobs set to control the faders. I can tweak any (or all) of the knobs down to 9:00 and they will gradually (over 10-15 seconds, sometimes much less) drift all the way to max volume.

As soon as I touch a knob, it will snap back to where its sposed to be, but once released, it will drift up again. They always drift up... never down. It's very frustrating.

I fear that it's a hardware problem... but I'm hoping I don't have to send it in for repair. It has never moved from it's present home... so it isnt like its been abused or anything.

Anyone have a ray of light to offer?

~Gary

Re: Realtime Control woes

17 Sep 2006, 08:25
gspencer

Try using the fantom without it attached to the computer.
If still having problems then I think you should ring Roland.


emooney
Also, maybe this is related or maybe not. But when the keyboard finishes booting up and it goes to the grand piano patch, the sound is greatly altered. It's like there is no attack at all. I have to switch to the second patch, then back to the first to get the piano patch back.
YOU'VE ALTERED THE PATCH
If you use the assignable controls and alter the patch it will remember it.

A simple Factory reset will give you all your original settings back.

← Back to Fantom-S and Fantom-X