Fantom-S and Fantom-X

How can i connect a mic to the fx6?

How can i connect a mic to the fx6?

8 Oct 2005, 15:58
I tried to connect a Shure microphone in the audio input and changed the input settings for the mic but no sound comes out. I already have connected guitars and bases, Can i connect the microphone directly to the x6 or i need something else?

Re: How can i connect a mic to the fx6?

8 Oct 2005, 18:15
As long as it's a dynamic mic and not a condenser or electret mic then it should work happily if you use an unbalanced mic cable.

:o)

Dave

http://www.drstudio.demon.co.uk/
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!
Dave

:: http://www.drstudio.demon.co.uk/ :: http://www.myspace.com/daveboulden ::
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!

Re: How can i connect a mic to the fx6?

8 Oct 2005, 21:44
What model Shure is it? It may require phantom power, not something provided in the Fantom's input jacks.

For example, the SM58 will work fine plugged in directly, but the Beta 87A won't (it requires phantom power).

I know, I know, it's bad that fantom doesn't give phantom!

Cheers!
Chris G.
Cheers!
Chris G.

<span ID='divTitleHack'>How can I connect a mic to the X6?</

9 Oct 2005, 05:17
[color=#65698e;"onmouseover="divTitleHack.innerHTML='Go buy a Heino CD now.'"onmouseout="divTitleHack.innerHTML='How can I connect a mic to the X6?']
dboulden wrote:

> As long as it's a dynamic mic

Also make sure your Input Select parameter in the Input Settings menu([SHIFT] & [MIX IN]) is set to MICROPHONE.[/color]

XXX, Don Philippo

Image

Re: How can i connect a mic to the fx6?

13 Oct 2005, 15:48
Phantom power is a 52 volt supply sent up one of the signal lines to power the preamp circuitry necessary to drive condenser mic elements. The quickest way to tell if it is a dynamic mic (as opposed to a condenser or electret mic) is to tell us the model number or check the spec sheet that came with it if you still have it.

If the mic works with other equipment that has no mention of phantom power then it is almost certainly a dynamic mic.

HTH

:o)

Dave

http://www.drstudio.demon.co.uk/
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!
Dave

:: http://www.drstudio.demon.co.uk/ :: http://www.myspace.com/daveboulden ::
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!

Re: How can i connect a mic to the fx6?

13 Oct 2005, 16:50
phantom power is actually 48 volts...not that that makes the rest of your answer incorrect...

Re: How can i connect a mic to the fx6?

13 Oct 2005, 17:24
You are quite correct, it is indeed 48 volts. For the life of me I don't know what made me say 52 volts!

It's been a hard day

:os

Dave

http://www.drstudio.demon.co.uk/
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!
Dave

:: http://www.drstudio.demon.co.uk/ :: http://www.myspace.com/daveboulden ::
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!

← Back to Fantom-S and Fantom-X