Fantom-S and Fantom-X

Help with my Fantom x realtime cntrl knobs!

Help with my Fantom x realtime cntrl knobs!

14 Sep 2005, 22:03
When I'm playing a patch, the sound starts to change automaticly, (if like the 4 realtime control Knobs would start to change while your playing the patch) _Hope someone could help me!

Re: Help with my Fantom x realtime cntrl knobs!

15 Sep 2005, 00:29
Aftertouch pressure could be assigned on certain patches to affect the sound. You could check the sensitivity settings for you keyboard in respect to aftertouch. Are you playing in patch mode when this happens?



Matthew

Re: Help with my Fantom x realtime cntrl knobs!

15 Sep 2005, 12:56
yes, i can be in patch mode or in performance mode and it happens on sounds like guitars pianos etc., what happens is that after you start playing, it starts to change the sound like if you would start to change the resso, attack, and other knobs. While im playing and the problem starts I have to move the control knobs or change the patch and return so it could be reset. _thanks

Re: Help with my Fantom x realtime cntrl knobs!

15 Sep 2005, 15:08
I'm lost on this one i'm affraid. Calling bassman, come in bassman or one of you other clever dudes - this guy needs some help!

Re: Help with my Fantom x realtime cntrl knobs!

18 Sep 2005, 18:23
This is indeed aberrant behavior on the part of gilbertofx's Fantom. It almost seems like it could be related to Patch Remain misbehaving, but not really.

???

This is a case of definitely doing a Factory Reset, and then seeing what occurs. Also, is this happening on a particular Song, all Songs and types (SVQ and Midi), or is there any external gear in your config?

Let us know.

Bassman
Bassman

Re: Help with my Fantom x realtime cntrl knobs!

24 Sep 2005, 15:46
hi,

I already did the Factory reset. I have observed that when I put the mixer in performance mode, the first 4 level controls start to move up and down alone. I think that the problem is that because the first 4 level controls are controled by the realtime Control Knobs, in some way they are moving alone (control knobs). Because when I'm in patch mode, I change the setting for the realtime control so its not controling nothing and the problem stops, but i think that the realtime are not suposed to do that? If there's a way to fix that problem please let me know.

_gilbertofx

Re: Help with my Fantom x realtime cntrl knobs!

25 Sep 2005, 00:53
Hey Gilberto,

I think you're right. The prob is with the knobs themselves and perhaps how they are fitted to the circuit board. I had the same problem with one of the knobs coming loose from the pot and causing all sorts of problems. Try gently moving each of the knobs from side to side and up and down to see if they feel loose at all. Also if, when turning the knobs clockwise, see if you can hear a sort of clicky noise.

If so, you'll have to take the board in to service unfortunately.

Re: Help with my Fantom x realtime cntrl knobs!

17 Sep 2006, 00:56
Just curious if a resolution was ever found... other than a new Fantom.

I'm having the same issue with my X7.

~Gary

Re: Help with my Fantom x realtime cntrl knobs!

18 Sep 2006, 10:53
Fantom knobs are very fragile unfortunately. I know this from the start and treated them gently, but they started to self-edit anyway. I think it is because they can't take any kind of downward pressure on them, and just the foam from my hard case was too much during transport.

Roland needs to go back to sliders if they can't do knobs any better than this.

← Back to Fantom-S and Fantom-X