Fantom-S and Fantom-X

Using Your Fantom Live

Using Your Fantom Live

16 May 2005, 23:21
I was interested to see how some of you guys go about configuring your Fantom for live playing, not rigs or anything but more so how you use the Fantom itself live.

I play in a Caribbean band and have my fantom set mainly in performance most of the time and have created and saved performances in my user memory which correspond to each song in the repitoire. This way when a tune is called I just scroll or list through to the performance I have named for that song. I am also constantly tweaking the splits, effects and patches in each performance too to get the sound just right.

The only downside I guess is that I have saved over most of the factory user performances in the process and sometimes in the heat of the moment on stage it can eb difficult to quickly scan through the performance list to get to the right one.

I also use piano mode for sole piano and rhodes sounds for certain songs.

So I'd be interested to know how most of you guys use your Fantom live too. Any tips/hints?

You can check the band I play in here: http://www.ehrenaud.com.au/

Re: Using Your Fantom Live

18 May 2005, 10:01
Hi Ben,
I use a Fantom X7 as my main master keyboard. I program 1 performance for each song on the set list. Each patch in a performance has it's own midi channel and in the case I want to play a sound on a remote synth I also use a dedicated midi channel. This has the advantage that you can control the volume, filter, resonance etc of your remote synth via the Fantom performance mixer screen.

I also use a Kawai K5000 to trigger sounds from the Fantom plus some modules in a 19" rack, e.g. Yamaha FS1-R for DX-7 sounds and a Wavestation for spacy strings and pads.

The set list itself is programmed in a Miditemp patchbay which sends all the program changes, transposes, keyboard splits and midi routing settings to my synths. Switching songs is done via de remote control of the Miditemp, you can enter a patch number or use the dial entry to select one. You could say that the miditemp itself is a synth since it allows you build performances in a similar way as the Fantom. The only difference is that you can combine or layer any sound from any synth :)

Sjaak - Fantom X7,SRX-07,SRX-09
Sjaak - Sometimes new technology gives us new ways to screw things up

Re: Using Your Fantom Live

18 May 2005, 11:13
I have started a thread that you might find interesting. You've probable seen it already but I'll put it here anyway.

Details can be found in this Thread.

Feel free to try out all the svq's; they could potentially be very useful to you. I swear by them since a few weeks. If you want to be able to pull your perfomances (svq's) from an alphabetical list you don't neccesarily have to have version 2.0, but if you want to be able to put them in Live Play mode you do.

Regards,
Laurenz Nitert
Regards,
Laurenz Nitert

_____________________________________________________________________________________________________
Goodiebag: { Live 2.0(svq, doc) | Vilter Pads(svq) | RPS Status(zip) | XV5080(zip) | Fantom X + V-synth | mp3 }
[img]http://www.nitertautomatisering.nl/fantomized/lazeeboy.jpg[/img]

Re: Using Your Fantom Live

20 May 2005, 08:07
Hi Laurenz,
Thanks for this thread, it's very usefull. I also use lot's of real-time midi stuff live, the only difference it that I send the sysex from the miditemp to turn on/off certain features of the Fantom or what so ever. Anyway, using sysex the way you documented it for the Fantom is a relieve for many live players :)

Sjaak - Fantom X7,SRX-07,SRX-09
Sjaak - Sometimes new technology gives us new ways to screw things up

Re: Using Your Fantom Live

20 May 2005, 08:17
I've got a Miditemp M8 but I only use it as an mp3 player (expensive one at that). It's a shame to not use gear to it's full potential though.

The M8 and X8 are the only pieces of gear that I use live now. I downgraded, or upgraded depending how you look at it from:

Roland A90
Roland XV-3080
Roland JD-990
Akai Z8
V-Synth
Miditemp M8

to

Roland Fantom X8
Miditemp M8

and I heard my sounds were fatter now. You might argue that a V-synth should sound way fatter than an X8, but when I had all that gear, I just couldn't take it home with and it stayed unexplored, which is a shame. Now I have only the X8 I use it more than anything I've ever owned.

Regards,
Laurenz Nitert

BTW this thread is not mine
Regards,
Laurenz Nitert

_____________________________________________________________________________________________________
Goodiebag: { Live 2.0(svq, doc) | Vilter Pads(svq) | RPS Status(zip) | XV5080(zip) | Fantom X + V-synth | mp3 }
[img]http://www.nitertautomatisering.nl/fantomized/lazeeboy.jpg[/img]

Re: Using Your Fantom Live

20 May 2005, 11:23
I know this thread isn't your's, but I was refering to this thread. Anyway, it's not easy to get I good live sound. I sold my Triton, Kurzweil SP-88 and Trinity and purchased a Fantom-X7, bought a new stereo monitor and things became way better, especially the Fantom piano's, they sounded crappy on a mono monitor.

The Miditemp is the center of my setup, couldn't live without it. Besides the program changes and routing features, I like the keyboard splits and velocity changes. For example, I programmed a performance on the Fantom which consists of a DX-7 percussion bell sound and a Jupiter type string. The string will sound between 0-90, the DX-7 sound starts above 75. You can do this with a Fantom patch but not when you want to layer different sounds from different synths.

The last big improvement was a DBX compressor. Although the Fantom has a master compressor, imo it doesn't sound well.

Sjaak - Fantom X7,SRX-07,SRX-09
Sjaak - Sometimes new technology gives us new ways to screw things up

Re: Using Your Fantom Live

20 May 2005, 15:04
I agree, my Fantom X8 has cost me loads of money!
the Piano sounded crap in MONO, i spent another ?1800 on a pair of EV Stereo Cabs :-)
done about 3 gigs with my X8 in Mono, HATED IT!

The only way to go is STEREO......Never looked back, but my Credit Card has, lol


Laters..



Wayne

Professional Keyboardist in UK`s Number 1 Tribute To Bon Jovi

www.wayneharris.co.uk

www.bongiovi.co.uk
Keyboardist in Bon Giovi

www.bongiovi.co.uk

www.wayneharris.co.uk

http://www.youtube.com/profile_videos?user=Waynester1973

Re: Using Your Fantom Live

21 May 2005, 04:36
In my band we all got *stereo* custom made ear phones (variphone), MIDAS 12 aux monitor mixer (so everything is stereo: keys, miditemp, guitar), wireless microphones, belt packs and the guitarist is even fully wireless.

Stereo is SOOO much better. It gives you so much more information that you don't have to crank up the volume as hard as you normally would have to. The in-ear monitoring also dampens the crowd noise 23 dB (more or less) which also contributes to the longevity of you ears.

It costs a lot for 6 band players but monitor speakers cost about the same and you can play very silent if need be; only the drummer plays accoustical. The bass player and guitarist both have Line 6 Pod Pro XT and a single external effect. Me with my Fantom; them with just a 6HE and 2HE rack: it looks very minimalistic. No large cabs and monitors braring on stage. In June we have a gig which shouldn't be above 75dB at the Mixer. We plan to move the Mixer table to the neighbours of course ;-) Give the drummer some splitsticks and we're ready to go.

Regards,
Laurenz Nitert
Regards,
Laurenz Nitert

_____________________________________________________________________________________________________
Goodiebag: { Live 2.0(svq, doc) | Vilter Pads(svq) | RPS Status(zip) | XV5080(zip) | Fantom X + V-synth | mp3 }
[img]http://www.nitertautomatisering.nl/fantomized/lazeeboy.jpg[/img]

← Back to Fantom-S and Fantom-X