Fantom-S and Fantom-X

a details question

a details question

15 May 2005, 12:05
i'm working on understanding the inner workings of the matrix. On most of the factory patches, the matrix assines the ctrl source to syst 1-4. I got that these are the sources that control the whole of the boards sounds but one of these controlers is "foot type".
i tryed looking for what this is or what it does but i can't find a list of what cc:1-33 ect. do.
As a example, cc:1 is modulation and cc:2 of breathe. I know what these do, and i know that they can be assined to any realtime switch or nob. so i could assing "Foot Type" to the the d-beam. But what does "Foot Type" corispond to? is it just a name so that one can kepp track of what's where. As in, My modulation is on the d-beam and my breathe and foot type are on my switches? or is there something more that i don't know about.
i am new to synths, this is my first so i might be missing something blaitaint to old school synth kids.

great and fine things can never be common property: beauty is for the few.
circle 6

Re: a details question

15 May 2005, 12:53
Basically, the Fantom does not have a breath controller input and you do not have the foot pedal - but anyway you can use these controllers as a link between a physical controller (knob, d-beam) and a parameter (patch, MFX).

System Controllers (SYS CTRL) are a useful way to abstract your patches from linking to a certain controller for patch parameters. Patches can have different assignments for SYS CTRL 1 and SYS CTRL 2 etc. but then the end user decides which physical controller works as SYS CTRL 1, 2 etc. - this gives great flexibility.

Re: a details question

15 May 2005, 21:20
so the term "modulation" as in cc:1 and "breathe" as in cc:2 are just link names? and don't refer to anything physical but just a ditial road?

just wondering.

great and fine things can never be common property: beauty is for the few.
circle 6

Re: a details question

16 May 2005, 14:03
They are in reference to standard MIDI continuous controllers.

CC #1 is your Modulation wheel (which was replaced by Roland, and some others with a joystick at the bottom left of your keyboard). The joystick should trigger this.

Once upon a time there was a keyboard called the Yamaha DX-7, and on it, there was a breath controller input (actually, in almost all Yamaha boards since, too!) and this was hardwired to CC #2. Korg also adapted this for the negative Y-axis of the joystick as well.

Back in the DX-7 days, if you hooked up a expression pedal to the pedal input on the DX-7, it would send controller #4.

As time went on, people found it would be more useful to have it send #11 which is Expression, or #7 for Volume, but the legacy of #4 remains.

Today I actually have my FX set up with a breath controller (using an external box) and so when I blow into it, the Fantom receives CC #2 and reacts accordingly.

I also have an expression pedal set to CC #4 since I do things like Wah-Wah, and bringing up a strings or pad layer in a performance behind a piano.

So they have a use. Here's a table:
http://www.musicmarkup.info/midi/control.html

I hope I haven't complicated things. =)

Re: a details question

16 May 2005, 20:41
not at all, thank you for the info.
the more the better in my mind.

great and fine things can never be common property: beauty is for the few.
circle 6

Re: a details question

17 May 2005, 00:12
skx,

Are you using a MIDI Solutions breath controller? If so, would you be willing to share how you set it up and what your settings are? This is one of the things on my to-do list when work gives me a break.

Thanks.

Bassman
Bassman

Breath Controller and Fantom X (XR)

19 May 2005, 14:13
I bought the Midi Solutions breath controller about a month ago and put it between one of my controllers (XP-30) and the fantom. I got it to change volume on a sax patch, but not in a very useful way. Are there patches that respond to breath out of the box? If not, any tricks would be greatly appreciated.

I know the midi solutions product is programmable, but their manual is horred and all the messages are in hex. I am not sure which program to use to send the messages in or how. They have software for their Event Controller, I wish they did the same for the Breath Controller. Do you change the settings on the controller or on the fantom or both?

Again, thanks for any pointers.
Thanks,
I have been using the BOME virtual keyboard for awhile. I would love it if someone would post useful applications (ie patch names and settings) for the breath controller. Thanks again..

Re: a details question

23 May 2005, 12:23
You're welcome.

I am wanting to get the breath controller thing going also. I have been looking for a place to get some initial settings, but now figure that I will just hook up and begin to experiment and sort it out through trial and error.

If I get lucky and make any useable progress, I'll post it here.

Bassman
Bassman

Re: a details question

23 May 2005, 12:39
You really won't find presets designed to take advantage of Breath Controller CC messages on anything but Yamaha products.

Your best bet - at first - is to assign the Midi Solutions device to send Aftertouch CC messages as quite a few Fantom patches use Aftertouch to control Volume, Filter Cutoff, Modulation, etc.

My experience with Breath Controllers is that they work best on patches which produce almost no sound at all without the Breath Controller.

When you get to the point where you are ready to create patches specifically for use with Breath Control try the following:

1) Have BC control the Volume only a little bit.
2) Have the BC completely control Filter Cutoff, so that the filter is not even open at all without BC messages, and can be completely opened with strong breath pressure.
3) Experiment with having BC control both Modulation amount as well as speed.

Re: a details question

23 May 2005, 12:59
dansgold,

Thanks much for the info. I haven't really used a BC since the days of my Yamaha TX-81Z. I remember how expressive it could be. Of course, the TX had a BC input and was 'BC ready' right out of the box, as many of the Yamaha boxes were.

I did find a site by a company called Patchman that has some patches for the Roland XV series, specifically set up for use with a wind/breath controller. These may not work with the Fantom because of the different waveforms, etc. I may look into it a bit further, but will probably try some of your suggestions initially.

Thanks again!

Bassman
Bassman

← Back to Fantom-S and Fantom-X