Fantom-S and Fantom-X

Help!! Is there a way too create this type of filter

Help!! Is there a way too create this type of filter

11 May 2005, 02:44
Im looking for a filter that instead of cutting off everything outside of a band pass filter it cuts of everything inside the bandpass filter sort of like a reject band pass filter is this possible? thanks!!

Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel
Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel

Re: Help!! Is there a way too create this type of filter

11 May 2005, 04:01
There are two ways:

1. Use the "super filter" MFX, it has the Notch filter type you are looking for. You can follow the instructions given in the TweakBook article named "super filter instead of TVF" in order to apply an envelope and/or LFO to this filter.

2. Use a trick: say if you want this filter on some wave or sample, then say you have this wave on tone 1. Copy this tone to tone 2. Then set tone 1 filter to LPF, cutoff = 60-70, and tone 2 to HPF, cutoff = 100-110. Now you have a Notch filter formed with low- and high-pass filters.


A.

Re: Help!! Is there a way too create this type of filter

12 May 2005, 02:21
oh so notch means the opposite of a band pass filter got it!! thanks

Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel
Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel

Re: Help!! Is there a way too create this type of filter

13 May 2005, 23:00
So, what IS a band reject filter then? i thought it was the one that was supposed to cut frequencies present IN the band!



---------------------------------------------------------------
If at first you dont suceed, then skydiving is definitively not for you.


---------------------------------------------------------------
If at first you dont succeed, then skydiving is definitively not for you.

Re: Help!! Is there a way too create this type of filter

14 May 2005, 02:33
yeah mainly instead of outside.

Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel
Partho- BTD-
" Its not the Fall that kills you..........(thump) its the sudden stop at the end"- Vin Diesel

Re: Help!! Is there a way too create this type of filter

14 May 2005, 03:27
Thread moved to "Sound section".

By the way, a "band reject filter" is the same thing as a notch filter. Notch filters are often more narrow than band reject filters, but the concept is still the same.

Regards,

Nathan Sheldon
http://www.nathansheldon.com/
Regards,

Nathan Sheldon
http://www.nathansheldon.com/

Re: Help!! Is there a way too create this type of filter

16 May 2005, 13:50
Either 2 partials, one set as a LPF, the other as a HPF, or you might be able to route the signal through 2 Super Filters, same concept...

Re: Help!! Is there a way too create this type of filter

16 May 2005, 14:06
skx:

Why if the super filter has the NOTCH anyway?

Re: Help!! Is there a way too create this type of filter

15 Jul 2005, 19:20
Here's another way to create a band-reject filter :

1. Turn on waveform 1 and 2.
2. In Tone 2, dial in the waveform you're going to filter out.
3. In the TVA section, turn down the level to zero for Tone1.
4. Choose Structure 2.
5. Set tone 1 filter to HPF, adjust cutoff for the upper half of the filter.
6. Set tone 2 filter to LPF, adjust cutoff for the lower half of the filter.

I know, it's alot more steps but at least you don't have to use an MFX to do it.

Re: Help!! Is there a way too create this type of filter

16 Jul 2005, 18:29
I found these articles about audio filtering pretty informative :
http://www.soundonsound.com/sos/aug99/articles/synthsecrets.htm
http://www.soundonsound.com/sos/sep99/articles/synthsecrets.htm
http://www.soundonsound.com/sos/oct99/articles/synthsecrets.htm

I'm glad lowfreq posted a way to do it without an mfx unit. I save the mfx units for things i can't do otherwise :)

(edited cause my message was full of rubbish)

Re: Help!! Is there a way too create this type of filter

17 Jul 2005, 01:57
lowfreq:

This is not correct. If you set HPF and LPF in series you will get a band-pass filter.

xonox:

Read my previous post above, no MFX required.

Re: Help!! Is there a way too create this type of filter

17 Jul 2005, 15:52
sorry Artemio, didn't see your post.
After much confusion, now it's clear in my mind. Never thought i'd get so confused with filter types.

Now i want to try these tricks in my patches :)

Re: Help!! Is there a way too create this type of filter

17 Jul 2005, 16:56
yep you're right Artemio.. i didn't bother to check it out.. I got confused because the way I use serial filters (and here's a tip) is to use it as a double peaking filter.. I can eq both the high and the low of a waveform, work's really well to make a sound stand out.. I guess I thought you could reverse the filters by creating a 'hole' but it doesn't work that way serially.. you would have to use two separate waveforms and two seperate filters like u said in the beginning of the post.

Re: Help!! Is there a way too create this type of filter

18 Jul 2005, 01:20
Good, I'm glad you saw my post and figured this out.

← Back to Fantom-S and Fantom-X