MC707 / MC101

MC-101 Auto Channel + Track Channels

MC-101 Auto Channel + Track Channels

29 Jan 2026, 02:26
MC-101 Pre-sales help please and thank you!

Does the midi channel per track still RX/TX when auto channel is set? (to a channel not used in the 1-4)

For instance auto channel is 5, I expect to control the selected track. At the same time, will Track 1 also respond to input from midi channel 1?

And does the soft thru when playing channel 5 route to channel 1 output when track 1 is selected?

Re: MC-101 Auto Channel + Track Channels

7 Feb 2026, 15:20
From my experience on the 707, the selected track will be affected by incoming controller data if the track is enabled to receive it. Can't speak for the 101, whether or not MIDI functions can be disabled per track. That's what you need to find out, if each track's MIDI Tx and Rx can be disabled individually. If not, you'll have endless issues when sending controller data, as as soon as you select a different track it may mess with the tone's settings of the selected track. Download the manual and look at the individual track settings. To the best of my knowledge the 101 is 4 part multimbral when used as a synth module, so you can probably set each track individually. But check it before you buy it. The 101 has all the same tones as the 707, and they are really, really good sounds.

← Back to MC707 / MC101