Fantom Platform

Stop pad loop with pedal ?

Stop pad loop with pedal ?

27 Mar 2025, 01:18
Hi friends,


I play in a cover band and I use many samples that are looped ( like the talk box in living on a prayer ). I trigger it with a pad ( loop box checked ). When the chorus comes I need to stop it, and then I have to trigger the pad again ( leaving my other keyboard ... ). I want to know if is there a way to trigger the pad with a pedal ?

Thanks

Re: Stop pad loop with pedal ?

28 Mar 2025, 03:51
davepaich2 wrote:
I want to know if is there a way to trigger the pad with a pedal ?
I do not think that it is possible to do it directly with the Fantom. It might be possible to do it from another keyboard that can send note on/off messages in latching mode from a pedal. I think the Roland A-300Pro MIDI controller can do that, however, the note number is fixed per control map (program), and the A-300Pro only has 16 (?) control maps/programs.

I am not aware of any other keyboard that supports such a feature. A more realistic option might be to use software solution on an iPad/computer.

Re: Stop pad loop with pedal ?

30 Mar 2025, 21:35
Hi davepaich2:
davepaich2 wrote:
I want to know if is there a way to trigger the pad with a pedal ?

Thanks
A easy way to do some similar, is to choose a free zone in your scene and set it as a PAD ZONE
Menu->Scene edit->General
Pad Mode: SAMPLE PAD
Pad Zone Select: zone number you choose (a free one)

Then this zone triggers a samples assigned to each note.
On Pad Mode you must edit each one (modes gate/loop/fx sw)
then make a split on that zone allowing only a range of keys you want to use (lower or upper side of the keyboard).
Its very powerful.
This was explained by Scott Berry at Roland Fantom Customer experience free clinic a couple of years ago.
Best regards,

Re: Stop pad loop with pedal ?

4 Apr 2025, 10:45
Hi Mostinif.
I have a Fantom X7 and I do understand what you mean by that explanation of the free zone in the scene for the most part. I'm just not sure how the pedal activation factors into that. How do you get the pedal, either through the control jack or the hold jack to trigger the pad? I do not see that part in your set-up description.
Thanks.

Rob

Re: Stop pad loop with pedal ?

8 Apr 2025, 21:44
Hi Robertdsmn:
Robertdsmn wrote:
...
I'm just not sure how the pedal activation factors into that. How do you get the pedal, either through the control jack or the hold jack to trigger the pad? I do not see that part in your set-up description.
.....
As I mentioned in my previous post, the idea is to have similar behavior using the keyboard.

Samples are triggered by "receiving a NOTE ON message" (in a simple way to say). Meanwhile, the controls—mainly the pedals—send CC messages, among others—excluding Note On. There are a START/STOP options, but when I tested it, doesn't work with samples.

Therefore, as a compromise, the idea is to map part of the keyboard (low or high notes) as a sample trigger, trying to avoid taking your hands off the keyboard to use the pad buttons. It's not exactly what you want, but for now, I don't see any other alternative than this or using an external controller.

Best regards,
Flavio

Re: Stop pad loop with pedal ?

9 Apr 2025, 10:00
Hi again.
So, you either have to press a key on the keyboard or use an external controller that sends note-on messages to trigger a sample without pressing one of the pads. Correct?

Thanks.

Re: Stop pad loop with pedal ?

9 Apr 2025, 21:29
Hi Robertdsmn:
Robertdsmn wrote:
....
.. you either have to press a key on the keyboard or
....
Yes: setting a zone as a "PAD ZONE" as I explain before
Robertdsmn wrote:
...
or use an external controller that sends note-on messages to trigger a sample without pressing one of the pads. Correct?
....
Also, yes. By adding MIDI IN/OUT to this zone (Led Lite in Orange ...red/green) and the external controller sends a NOTE ON MIDI to its MIDI Channel.

Of course you should add your samples to the PAD on each particular Bank/key before use. For example C1 maps to Bank1 / PAD 1 (without any transpose).

I tested properly and works fine using a DAW as a exernal controller.

Best regards,
Flavio

Re: Stop pad loop with pedal ?

16 Apr 2025, 10:05
Hello. I'm not sure if this is getting to the original poster or not.
If you check the response from Mostinif, you'll see that he suggests using a Midi device that can transmit note on messages to do what you are requesting. I have a small pedal called a Midi Baby from Disaster Area Designs that looks like it will do the trick. It may not look like much, but it is fully programmable to do many MIDI functions like program changes and note start and stop. You can pick one up on Reverb for about $100.
That would be my best suggestion.

Re: Stop pad loop with pedal ?

16 Apr 2025, 10:16
Hi again Flavio.
This is a question on a different topic, but you seem to be very knowledgeable about Roland products and no one is answering my post about it.
This is the question I posted:

Hi there. I am a Fantom X7 user and I play in a tribute band.
There may be instances in the future where my band will be doing a travel gig where bringing the keyboard on a plane would not be a good option. I was thinking of purchasing an XR Module off of Reverb or Ebay and just bringing that to the gig and just hook it up to a MIDI Controller keyboard provided by the production company at the venue. My main concern would be how to make sure the note assignments, keyboard splits, pad assignments, hold/control pedal assignments, etc. will be the same on the controller as when using the Fantom keyboard as normal. Would there be excessive tweaking involved to make sure the patches are replicated properly? I'm assuming there is a way to load all my patches and samples from my Fantom to the module easily, provided that the module has the same expansion card and memory capacity.

Any help you could give would be greatly appreciated.
Thanks.
Rob

Re: Stop pad loop with pedal ?

16 Apr 2025, 20:37
Hi Robertdsm:

Thanks you for your words. I'm just a simple eletronic keyboard/syths hobbyist whose main job is IT.
I may clarify some of your questions. Others may requiere some mock ups test.
When you controls Fantom from external devices (master keyboard), keyboard splits and layers on Fantom are not taken in account. Note assignment also. The external keyboard should handle splits, layers and note assigment.

Pedals, like others controls, must send correct MIDI messages CC to a Fantom Zone (MIDI Channel) to be processed AND if it's allowed to be processed via Fantom Tone Generators, according to the configuration of which MIDI messages the Fantom will process (ZONE MIDI MSG menu).

I don't test if we define a particular ZONE as MIDI INT/OUT (orange LIT) and we play notes from master keyboard and the pedals are on Fantom.

Best regards,
Flavio

← Back to Fantom Platform