Fantom Platform

Fantom 7 Aftertouch

Re: Fantom 7 Aftertouch

10 Jun 2022, 04:31
Aftertouch risking wrist damage or forget aftertouch and keep playing. 🎹🎹🎹🎹

I go using ZEN-Core tone>Tone edit>To PRO>OSC [CHOOSE PARTIAL]>DELAY>HOLD to simulate aftertouch... Want fakeaftertouch now ? Hold the note. Don't want fakeaftertouch now? Release before the time set to HOLD.

I wish the KEY OFF delay option had also a HOLD delay.
Currently if you use KEY OFF it will always sound. Yes, a delay can also be applied, but it will sound sooner or later. With a HOLD it would sound after releasing the key only if It has been HOLD sufficiently. Another mode of fakeaftertouch but not available so far in this way.

So we are committed to add VELOCITY...
VELOCITY acomplished ? Yes/No.
HOLD or RELEASE accomplished ? Yes/No.
If any nay, don't sound.

Anyway, see if SYSTEM>KEYBOARD>Aftertouch Sens is already set to your need. Maximum was 100 before Version 2.00 and 127 since its release.
Regardless of the change, Roland still said it should normally be set to 100.

[attachment: Aftertouch Changes from Ver 2.jpg]

😀😀😀😀
Attachments
Aftertouch Changes from Ver 2.jpg (176 KB, 3538 downloads) · file not available

Re: Fantom 7 Aftertouch

10 Jun 2022, 06:48
I asked the Roland Europe about Aftertouch problem.

Answer:
"I am afraid that I have heard complaints like this before and the engineers in Japan are aware of this. For what it is worth, please make sure that you are using the lates firmware version as there has been some improvements made.

Also, for what it is worth, on my unit my experience is best if I set the Aftertouch Sensitivity to around 65. I have also developed a technique to play the keys "close to the edge" to be able to control the aftertouch more precisely.

I am afraid that I do not think there is anything wrong with your unit. Hopefully there will be further improvements later on."

Re: Fantom 7 Aftertouch

10 Jun 2022, 09:53
sepi wrote:
I think I have to touch pretty (too) hard to take effect the Aftertouch effect. Is there someting wrong?

AFT Issue
https://www.youtube.com/watch?v=DcudIeIpE18
No - but I do think Roland missed a unique marketing opportunity:

"The new Fantom line features Roland's latest in midi controller technology: Afterbash! While similar to the traditional 'after-touch', Afterbash takes this idea to a whole new level of challenging, physical interaction (please consult your doctor before use)!"

Re: Fantom 7 Aftertouch

20 Jun 2022, 12:58
I just got my Fantom 8 and aftertouch is completely useless on it. You have to press so hard to make it work that you could easily hurt yourself. Most other people report the same thing. We all need to give Roland regular and non-stop comments about this. It is an advertised feature that simply does not work. They know it, but they continue to sell product while advertising this feature. This isn't something you fix in firmware. If it were, they would have done it by now.

I might understand if it was just on the Fantom 8 with the PHA50 keyboard (meaning I can see why it might have been an issue only with the piano action keyboard and not the synth action keyboard), but I see everyone (Fantom 6, 7, and 8 owners) complaining about this. Regardless, it is inexcusable that it is so bad on any Fantom. They need to stop advertising the feature and admit the mistake.

Re: Fantom 7 Aftertouch

29 Jun 2022, 03:36
i have Fantom 6 aftertouch goes with decent pressure.but suddenly jumps from zero to maximum. so it has only two states.I am also very dissatisfied with this malfunction.I checked the sensitive analog tape on the keyboard. if we insert a plastic blade between the keys and press lightly, a good transition from zero to maximum appears. so the flap presses on a surface that is too large.so it may be the wrongly made sensitive band or the poorly correlated analog sensitivity amplifier at the input. I also work on Jupiter 80 aftertouch it works perfectly on this device, if I connect the jupiter 80 keyboard on the midi to Fantom 6 the operation is perfect (aftertouch)

Re: Fantom 7 Aftertouch

29 Jun 2022, 07:56
sepi wrote:
The video below shows (9:34) how to change the Aftertouch effect. I can't save the settings by pressing the Write button.
How do I save a setting (keep settings)?

Exploring “Matrix Control”
https://www.youtube.com/watch?v=9Ysr-IedQPA

sepi, all those changes seen in the video to the matrix are made via the settings available in the tone (ZEN-Core type). As soon as you move anything a yellow asterisk will appear next to the the tone (screen showing zones) and if you try to save the scene before saving those changes appropriately you will be warned changes made in the tone will not be saved, but discarded.

So keeping those changes made in the tone is made via WRITE>TONE...choose a name (RENAME)...choose a destination (ENTER and scroll till reaching the desire slot)...OK or ENTER and then OK ...confirm you are sure via OK or CANCEL if not.

Re: Fantom 7 Aftertouch

29 Jun 2022, 08:27
Thank you FGM for inform. I try to learn to use Fantom more and more..

Re: Fantom 7 Aftertouch

29 Jun 2022, 14:36
octavian7000 wrote:
i have Fantom 6 aftertouch goes with decent pressure.but suddenly jumps from zero to maximum. so it has only two states.I am also very dissatisfied with this malfunction.I checked the sensitive analog tape on the keyboard. if we insert a plastic blade between the keys and press lightly, a good transition from zero to maximum appears. so the flap presses on a surface that is too large.so it may be the wrongly made sensitive band or the poorly correlated analog sensitivity amplifier at the input. I also work on Jupiter 80 aftertouch it works perfectly on this device, if I connect the jupiter 80 keyboard on the midi to Fantom 6 the operation is perfect (aftertouch)

You mean you have selected REMOTE KEYBOARD in Fantom and using Jupiter 80 to play Fantom the aftertouch in Fantom works perfectly well thereby proving there is an issue with the Fantom keybed ?

Re: Fantom 7 Aftertouch

20 Aug 2022, 08:33
FGM wrote:
octavian7000 wrote:
i have Fantom 6 aftertouch goes with decent pressure.but suddenly jumps from zero to maximum. so it has only two states.I am also very dissatisfied with this malfunction.I checked the sensitive analog tape on the keyboard. if we insert a plastic blade between the keys and press lightly, a good transition from zero to maximum appears. so the flap presses on a surface that is too large.so it may be the wrongly made sensitive band or the poorly correlated analog sensitivity amplifier at the input. I also work on Jupiter 80 aftertouch it works perfectly on this device, if I connect the jupiter 80 keyboard on the midi to Fantom 6 the operation is perfect (aftertouch)

You mean you have selected REMOTE KEYBOARD in Fantom and using Jupiter 80 to play Fantom the aftertouch in Fantom works perfectly well thereby proving there is an issue with the Fantom keybed ?
I have a Jupiter 80 and that also has very stiff aftertouch. Also the A800pro unuseable. So when I bought the Fantom 6 my hopes weren’t high.

← Back to Fantom Platform