Fantom Platform

Set zone to always play max velocity

Set zone to always play max velocity

25 Mar 2022, 23:11
New to Fantom 6. Finally succeeded in multi sampling an external synth and setting the appropriate key ranges in the scene. However I only want the zone to play the maximum velocity (127). I have set the upper and lower velocity ranges to 127 on Zone Edit but that has no effect (the zone still response to how soft or how hard I play the keys).

Am I missing something?

Any help will be appreciated

thanks

Re: Set zone to always play max velocity

25 Mar 2022, 23:26
Hi,

Try MENU->ZONE EDIT->VEL RANGE
Select your zone
Velocity Sens -63

Save your scene if you want to persist it
Best Regards,
Flavio

Re: Set zone to always play max velocity

25 Mar 2022, 23:44
Thanks Flavio but unfortunately that doesn't work (eg if I hit the keys hard I get zero output when sensitivity is set to -63). I don't want any velocity sensitivity at all - just want all keys in the zone to play the max velocity regardless of how hard or soft I hit the keys.

Can't be that difficult - I must be doing something wrong or missing something surely?

Re: Set zone to always play max velocity

26 Mar 2022, 01:33
I do this at "Tone"-level: Menu - Tone edit - Amp - set Velocity sens to 0
Make sure all the partials are marked yellow so the change is applied to all partials.
In case you don't know it: changes in the Tone are not saved when you save the Scene, so don't forget to save it via Write - Tone...

...and congratulations on your new Fantom! It is a fantastic synth (but of course not 100% perfect)!
Last edited by osflaa on 26 Mar 2022, 13:34, edited 1 time in total.

Re: Set zone to always play max velocity

26 Mar 2022, 05:06
Tone edit > PRO > AMP tab.

Set Velocity Curve to FIXED.

Most probably you are done, but...

Check Bias Level set to 0.
If other value is there, then starting from the NOTE set in Bias Position (60 for C4) loudness will change in value (-100/+100) as set under Bias Level in the direction set in Bias Direction (LOWER, UPPER, LOWER&UPPER, ALL).

MATRIX CTRL 1 to 4 could also be affecting the level. Check Destination 1 to 4 on each MATRIX and see whether LEVEL appears or not. Set to 0 any you might find.

Also we coul get some kind of "Velocity sense" as some partials could be affected by:
1...different keyboard ranges, making the sound thicker as all go sounding when you reach a range that is available for all.
2...different attacks that make each partial start at a different time.
3...a mixture off differences in envelopes that progressively add partials.
4...different DELAYS, under the OSC tab.

Re: Set zone to always play max velocity

26 Mar 2022, 06:28
Thank you osflaa that worked. And thank you for congratulating me on my purchase. I've had an FA06 since they were first released and that has been the hub of my whole live rig. But the time setting up that rig (and pulling it down not to mention transport logistics) with other external synths meant that the Fantom with multi sampling capability would make the whole rig a lot easier at gig time. Not to mention after touch and much better polyphony. But I wasn't expecting the bonus of marking and chaining which are just god sends for me. I must admit though I felt very uncomfortable when the the '0' series was released - I thought I had made an expensive mistake until I read the specs of the new series and I am so pleased (and relieved) with my purchase.

Also thank you FGM - I did change the velocity curve to Fixed but you helped me with better knowledge and understanding of the instrument.

I must say that you guys (and people like you) and the forum are a huge benefit to owning The Fantom - I really appreciate the timely and very helpful advice and comments that I have got over the time I've had Roland synths. Thank you all so much

Re: Set zone to always play max velocity

26 Mar 2022, 13:20
Glad to help .
😀😀😀😀

There are very many settings ...

Under Keyboard Settings in System....

[attachment: Keyboard Settings.jpg]
Mine is set to Real, Medium, 0, ON and 100.



Search the Parameter Guide for Velocity and you will be thoroughly gifted...

https://www.roland.com/uk/support/by_product/fantom_8/owners_manuals/0f8a0d42-7bf5-43c2-a038-4e3653e4f5c5/

https://www.roland.com/uk/support/by_product/fantom_8/owners_manuals/

🎹🎹🎹🎹
Attachments
Keyboard Settings.jpg (479 KB, 4055 downloads) · file not available

← Back to Fantom Platform