RD-2000 / RD-88

Using volume slider with External instruments on RD2000

Using volume slider with External instruments on RD2000

10 Jan 2021, 00:11
Was watching the Roland vid about External instruments.

https://www.youtube.com/watch?v=Jb7OkhV7ytU

Managed to set up Ext 5/6/7 to control 3 separate VSTs in Cubase on CH5/6/7.

But in the video, you clearly see the user operating the Roland faders to control the volume of the external instrument. This is having no effect here.

Any ideas?

Secondly, I was trying to use the rotary encoders to control things like VST cutoff in Cubase. This worked. However, when I changed the focus in cubase to another VST, moved the encoder, and then changed the focus back to the original VST, the encoder lights stayed at the moved position and did not regain the correct position to indicate the true value in the VST.

I tried both absolute and relative in the VST and relative actually broke the relationship totally, making it impossible to even enter required values with the encoder in the first place.

Anyone got this sort of thing working?

Re: Using volume slider with External instruments on RD2000

10 Jan 2021, 21:31
When the green (external) light is illuminated above a slider(s), and the slider select (right of sliders) is on Level, that slider(s) will send cc7 (volume) on that zones external midi channel.

You can choose one additional cc to send when the slider mode is Assign (same Cc on all zones).

The knobs in "control" or "assign" mode are one-way out of the RD-2000. If you make a external change, they will not sync.

For the "control" knobs (2-8) and volume slider, you could re-sync the RD position with the appropriate Sysex to that external zone, but don't believe that is default Cubase behavior. There are three additional values in the midi map that can re-sync if used in assign mode

Re: Using volume slider with External instruments on RD2000

10 Jan 2021, 23:05
DesertBoat wrote:
When the green (external) light is illuminated above a slider(s), and the slider select (right of sliders) is on Level, that slider(s) will send cc7 (volume) on that zones external midi channel.

You can choose one additional cc to send when the slider mode is Assign (same Cc on all zones).
Thanks for that.
DesertBoat wrote:
The knobs in "control" or "assign" mode are one-way out of the RD-2000. If you make a external change, they will not sync.

For the "control" knobs (2-8) and volume slider, you could re-sync the RD position with the appropriate Sysex to that external zone, but don't believe that is default Cubase behavior.
I have no idea how to do that.

It does rather trash the value of encoder knobs if they don't update when channel hopping. Is this typical behaviour, or a limitation of either Cubase or the Roland-2000. If the latter, then this is really annoying on such an expensive midi controller.
DesertBoat wrote:
There are three additional values in the midi map that can re-sync if used in assign mode
I don't understand what you mean by this. Any clues?

Regards,

Re: Using volume slider with External instruments on RD2000

11 Jan 2021, 10:38
re:
It does rather trash the value of encoder knobs if they don't update when channel hopping. Is this typical behaviour, or a limitation of either Cubase or the Roland-2000. If the latter, then this is really annoying on such an expensive midi controller.
There are plenty of good one-way midi controllers on the market.

But looks like you are looking for a higher level of integration - which requires "cooperation" between the controller and DAW. Roland has MainStage integration for the X(m), Logic and MainStage integration for the Fantom, and the brand-new MV-1 claims to be integrated with ZEN-Beats. There are several controllers integrated with Ableton, just for a few examples.

My other comments a pointing out that the hooks for integration on some (~ 11) encoders are present in the RD2000. I do not know if Cubase provides a way to implement the other end, and if so, if someone has made the template. And might be some amount of work to synchronize eight rotary positions.

← Back to RD-2000 / RD-88