Switching between OS 1.51 and 2.00 using a card
5 Jun 2005, 06:16While discussing what the next VC card should be, some people mentioned the usefulness of a card giving access to the old 1.51 operating system and original waveset "on the fly".
I found a way to make such a card oneself. In fact, I did two cards: one with 1.51 and the other with 2.00. Now, I can easily boot my V-Synth in any of the two modes, in a simple way, without any computer connected.
Here it is:
Use this trick at your own risk... I feel not responsible of any damage ...blah-blah... Powering down the V-Synth while the update is running, may irretrievably damage your V-Synth...
1. Rescued two old 16MB CF cards from the trash
2. Downloaded both 1.51 and 2.00 operating systems updates from http://www.roland.com/products/en/_support/dld.cfm?ln=en&dsp=0&iCncd=21
3. Downloaded SYRB1.BIN from http://v-tribe.info/gear/v-synth/update/SYRB1.BIN (it seems that this file instructs the V-Synth to automatically update from an external card).
4. Transfered "V-Synth.rom" and "V-SynthDiskImage.bin" (those files are found in the OS updates) and "SYRB1.BIN" to the root folder of the CF card. Did two cards, one for each OS.
5. Plugging one of these cards into the V-Synth, automatically triggers the update when the V-Synth powers on.
6. Once the update is finished, remove the card and cycle power the V-Synth once again.
Beware: this procedure may be risky if the card ever fails during the update. Transfering the update files though USB into V-Synth's internal drive may be more reliable in such a respect.
I found a way to make such a card oneself. In fact, I did two cards: one with 1.51 and the other with 2.00. Now, I can easily boot my V-Synth in any of the two modes, in a simple way, without any computer connected.
Here it is:
Use this trick at your own risk... I feel not responsible of any damage ...blah-blah... Powering down the V-Synth while the update is running, may irretrievably damage your V-Synth...
1. Rescued two old 16MB CF cards from the trash
2. Downloaded both 1.51 and 2.00 operating systems updates from http://www.roland.com/products/en/_support/dld.cfm?ln=en&dsp=0&iCncd=21
3. Downloaded SYRB1.BIN from http://v-tribe.info/gear/v-synth/update/SYRB1.BIN (it seems that this file instructs the V-Synth to automatically update from an external card).
4. Transfered "V-Synth.rom" and "V-SynthDiskImage.bin" (those files are found in the OS updates) and "SYRB1.BIN" to the root folder of the CF card. Did two cards, one for each OS.
5. Plugging one of these cards into the V-Synth, automatically triggers the update when the V-Synth powers on.
6. Once the update is finished, remove the card and cycle power the V-Synth once again.
Beware: this procedure may be risky if the card ever fails during the update. Transfering the update files though USB into V-Synth's internal drive may be more reliable in such a respect.