Need Some Help Sequencing a Bunch of Songs
2 Jun 2017, 13:49OK all, here's what I want to do:
1. I'm playing in a trio, Bass, Guitar and Drums.
2. I will play guitar live, and, I also want to play any keyboard parts I can cover live as well, whenever either the guitar is laying out, or it's not prominent, or just a backing part and the keyboard part is the "main" part. IOW, I'm going to play the "main" part on either guitar or keys live, and any backing of either will be relegated to the sequence.
3. Because of this, I foresee needing to play some split keyboard parts. So I think what I need to do is leave tracks 1 and 2 of my sequences empty (as place holders) and put on Channels 1 and 2, the keyboard parts I need live.
Now, to set up the splits (which will vary) I think I will HAVE to use Studio Sets, correct?
IOW, if I just embed some PC (MSB/LSB/PC) messages in my sequence to pick the right sounds for channels 1 and 2, it's only going to play what the keyboard is set to. I think this would be far easier to set up in the Studio Set itself rather than trying to have all that info (probably sysex messages) embedded in each of the sequence's tracks.
4. There may be some audio clips I'll trigger (like a sound effects intro) either with the MIDI sequence itself (on channel 16) or if possible, play from the pads.
If I am correct, these are saved on a per song basis.
Also, if I am correct, when I recorded a song using the internal sequencer, it automatically associates a Studio Set with it.
So my thought is this:
Song 1:
A. Sequence of all MIDI notes.
B. Studio Set with necessary sounds (and live keyboard parts if any, etc.)
C. SS also contains any necessary samples to be triggered (live or by the sequence).
I would do this for each song, with a new SS for each song.
This means:
I will not need to put MSB/LSB/PC embedded in the MIDI Sequence itself, because the SS will have the correct sounds associated with the Sequence.
Correct?
So my working plan is this:
A. Import Sequence to or Create Sequence in Reaper.
B. Do NOT pick sounds in REAPER (via PC messages) but create a SS on the FA with necessary sounds.
C. Export from Reaper, import to FA.
D. Save the song and the SS together.
Is that right?
I also need to:
5. Make a Click Track. I think what I'd want to do is send the Click on a track out to the Sub Out. Again, I think I could just assign this easily in the SS.
6. Finally, if I'm correct, when you change a SS, all of the parameters reset, so there's also no need for any "reset" messages in my Sequence itself.
7. Just for perspective, the way I used to work is, I'd put all the PC messages and whatnot in the sequences themselves and would play them from a device external to the keyboard. In the case of the FA, this would mean I could just leave it on a single SS and let the Sequence send the PC#s to change the sounds.
But again, I think in order to do any splits that vary song to song for live playing, I'm going to specifically have to set up a studio set for that. Since the other stuff seems to work in tandem with that (output assign, reset of sounds/FX controllers, etc.) it seems that really, I don't need to do much in Reaper other than basic notes and real time controller events, then import that into the FA and do all the sound selection and assigning, etc. there.
Does that make sense?
One additional thing - I'm getting ready to try this but just in case someone knows:
8. I was also considering using the vocoder in an atttempt to provide some harmony vocals.
IIRC, there are 4 or so preset Vocoder effects, but I think you can also put the vocoder effect on any patch.
If so, I may be able to sequence notes to play back while singing into the mic for faux harmonies.
TIA
Steve
1. I'm playing in a trio, Bass, Guitar and Drums.
2. I will play guitar live, and, I also want to play any keyboard parts I can cover live as well, whenever either the guitar is laying out, or it's not prominent, or just a backing part and the keyboard part is the "main" part. IOW, I'm going to play the "main" part on either guitar or keys live, and any backing of either will be relegated to the sequence.
3. Because of this, I foresee needing to play some split keyboard parts. So I think what I need to do is leave tracks 1 and 2 of my sequences empty (as place holders) and put on Channels 1 and 2, the keyboard parts I need live.
Now, to set up the splits (which will vary) I think I will HAVE to use Studio Sets, correct?
IOW, if I just embed some PC (MSB/LSB/PC) messages in my sequence to pick the right sounds for channels 1 and 2, it's only going to play what the keyboard is set to. I think this would be far easier to set up in the Studio Set itself rather than trying to have all that info (probably sysex messages) embedded in each of the sequence's tracks.
4. There may be some audio clips I'll trigger (like a sound effects intro) either with the MIDI sequence itself (on channel 16) or if possible, play from the pads.
If I am correct, these are saved on a per song basis.
Also, if I am correct, when I recorded a song using the internal sequencer, it automatically associates a Studio Set with it.
So my thought is this:
Song 1:
A. Sequence of all MIDI notes.
B. Studio Set with necessary sounds (and live keyboard parts if any, etc.)
C. SS also contains any necessary samples to be triggered (live or by the sequence).
I would do this for each song, with a new SS for each song.
This means:
I will not need to put MSB/LSB/PC embedded in the MIDI Sequence itself, because the SS will have the correct sounds associated with the Sequence.
Correct?
So my working plan is this:
A. Import Sequence to or Create Sequence in Reaper.
B. Do NOT pick sounds in REAPER (via PC messages) but create a SS on the FA with necessary sounds.
C. Export from Reaper, import to FA.
D. Save the song and the SS together.
Is that right?
I also need to:
5. Make a Click Track. I think what I'd want to do is send the Click on a track out to the Sub Out. Again, I think I could just assign this easily in the SS.
6. Finally, if I'm correct, when you change a SS, all of the parameters reset, so there's also no need for any "reset" messages in my Sequence itself.
7. Just for perspective, the way I used to work is, I'd put all the PC messages and whatnot in the sequences themselves and would play them from a device external to the keyboard. In the case of the FA, this would mean I could just leave it on a single SS and let the Sequence send the PC#s to change the sounds.
But again, I think in order to do any splits that vary song to song for live playing, I'm going to specifically have to set up a studio set for that. Since the other stuff seems to work in tandem with that (output assign, reset of sounds/FX controllers, etc.) it seems that really, I don't need to do much in Reaper other than basic notes and real time controller events, then import that into the FA and do all the sound selection and assigning, etc. there.
Does that make sense?
One additional thing - I'm getting ready to try this but just in case someone knows:
8. I was also considering using the vocoder in an atttempt to provide some harmony vocals.
IIRC, there are 4 or so preset Vocoder effects, but I think you can also put the vocoder effect on any patch.
If so, I may be able to sequence notes to play back while singing into the mic for faux harmonies.
TIA
Steve