Fantom-S and Fantom-X

Sequencer

Hi,

I have read the FAQ wich explains why I am hearing the same
sound on all the tracks ( 2 ) aside from the drums. I have to change to performance mode. But I cannot seem to record on more than 2 tracks.

That is I get the baic tune on one track in order to layout the patterned sequence of the drums as if playing live ( real time record ), and I can get the bass on the second track, but I appear to be limited up to this point.

If I try to add a chorded piano effect on track 3 or any track for that matter it just does not register.

So I am stuck with the drums tne and bass, yet I should be able to record up to 16 tracks - yes?

Any light that could be thrown on this would be appreciated.

Thanks,

Harstro

always learning there is more to learn
always learning there is more to learn

Re: Sequencer

24 Sep 2004, 21:07
Hi Harstro,

Were you able to set up your piano on channel 3? If not press the mixer button (located to the right of the display). You'll see all 16 of your channels laid out (looks like a mixer). Press the left or right cursor keys to move through your channels. This is an easy way to move to different channels when you want to record. If your piano is on channel 3 then cursor over to channel 3 on the mixer page. Now you should be able to play the piano and you are ready to record track 3.

Press song edit, now you are in song mode. Press record (record window pops up) and select track 3 for recording. You cannot select which channel you are recording from here, you have to do it from the mixer screen.

You can record all 16 channels on track 1 or any of the tracks. It is up to you to use each track for only one channel if that is how you prefer to work. That is how I work. I like to have one channel per track.

There is a setting that auto selects track 1 for channel 1, track 2 for channel 2, track 3 for channel 3, etc. Press MENU---->SYSTEM--->STARTUP, Under song Rec Track Select set it to auto. From now on you'll automatically record one track for each channel. If you already recorded more than one channel on a track you can use the EXTRACT edit function to move a channel to another track.

Good Luck!
Korg Oasys
Roland MV-8800

Re: Sequencer

25 Sep 2004, 01:56
Hi Midid Guru,

Jeeps you are a guru. I didn't know any of the above. I am going to want to use each channel as an individual input so this is fantastic guidance for me. Thanks so much. I am going to set it up to auto now.

Again, thanks so much. This forum rocks.

Anna :)

always learning there is more to learn
always learning there is more to learn

← Back to Fantom-S and Fantom-X