JUPITER-80

Alesis iO Dock and JP-80/JP Editor

Alesis iO Dock and JP-80/JP Editor

19 Sep 2013, 16:35
Curious, has anyone used the JP-Editor App using an Alesis iO Dock connected with a Jupiter-80?
I have not been successful. Would have been nice to use the iO Dock instead of a camera kit.

Re: Alesis iO Dock and JP-80/JP Editor

20 Sep 2013, 08:36
I haven't tried it, but I know that the iO dock won't send any sysex (that sucks anyway), but I don't know if that can be the problem here.

Re: Alesis iO Dock and JP-80/JP Editor

20 Sep 2013, 18:31
Here are a couple of videos by a chap that has the Alesis iO Dock working with the Yamaha Tyros 4, so if it will not work with the JP-50/80, the incompatibility would have to be on the Roland side rather than on the iPad/iO-Dock side, or it would not work with the Yamaha either:

http://www.youtube.com/watch?v=tHOw-6sJIBA

http://www.youtube.com/watch?v=v4XS02zDQhU

Let us know if you are able to get it working, as I have been looking at one for my JP-50 for the same reason as you- the Camera Kit looks and feels really kludgy and seems to put a lot of sideways stress on the iPad's connector.

Maybe I should ask if you ever tried to use the Camera Kit ? If not, then you probably need to go into the JP-80's MIDI setup menu and make sure the GENERIC driver is selected. If it is still on VENDER, the 80 will not talk to the iPad.

Good luck !

Regards,

Ted

Re: Alesis iO Dock and JP-80/JP Editor

21 Sep 2013, 13:58
Thanks for the replies.
I had to get a camera connection kit and that works without any issue.
The iO Dock would be much better suited for use for me with the JP-80 because it gives power to the iPad, has the outs I need to get sound out of my iPad apps and I like it for its ruggerd housing of the ipad. Would have been nice to play apps other apps with the iO Dock sitting on the Jupiter and toggle between apps. I guess it is an issue in the JP-80 editor becuase it seems it only recognize s one souce. As soon as it is connected with the iO Dock it recognizes it but never connects to the JP-80.
It was worth a try because the two would have been great together. I may get a non slip pad to place under the iPad on that empty arera of the JP-80.

Re: Alesis iO Dock and JP-80/JP Editor

21 Sep 2013, 18:44
Thanks, Synthtron,

That's not the answer I was hoping for. I know - you neither.

I have visions of the connection end of my iPad, and the Camera Adapter, and the connector cord all swathed in silvery duct tape in order to keep everything together once the connections get a little bit loose and sloppy after a few more months of use. We need to find something that works "physically" like the iO Dock, but connects the iPad directly to the keyboard. I suppose the iO Dock could be hacked to work, but that is a lot of money just to carve it up and disable most of its features.

Regards,

Ted

Re: Alesis iO Dock and JP-80/JP Editor

21 Sep 2013, 19:56
tnicoson wrote:
Thanks, Synthtron,

That's not the answer I was hoping for. I know - you neither.

I have visions of the connection end of my iPad, and the Camera Adapter, and the connector cord all swathed in silvery duct tape in order to keep everything together once the connections get a little bit loose and sloppy after a few more months of use. We need to find something that works "physically" like the iO Dock, but connects the iPad directly to the keyboard. I suppose the iO Dock could be hacked to work, but that is a lot of money just to carve it up and disable most of its features.

Regards,

Ted
Sorry, maybe I'm missing the point here...why don't you use the MIDI (5-Pin) connectors for that?
- iO-Dock MIDI OUT ----> JP-80 MIDI IN
- JP-80 MIDI OUT -----> iO-Dock MIDI IN

And leave the USB MIDI of both (JP-80 and iO-Dock) to connect to your Computer/DAW if needed?
Make Music and be Happy !!
PauloF

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 06:46
Hi PauloF,
It would be great if we could connect like that. The issue is that the JP-Editor only recognizes the iO Dock and never makes a connection to the Jupiter-80 once it is placed in the Dock. It does not matter if you're using USB or the MIDI IN/Out ports. Unless I am doing something wrong. I can get the editor app to connect through the camera connection without any problems. Too bad that once the app recognizes the Dock it does not recognize the JP-80 too to bridge the communication gap. I wonder if Roland is aware of this, that is assuming the issue is within the app but I do not really know. I doubt Roland intended or thought people would use another device like the iO Dock that the app may see over the JP-80. Would be really nice to use equipment like the iO Dock over just sitting the iPad on the JP with a camera connection kit.
At least we have the editor, I am glad for that.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 07:05
Tnicoson,
I wonder how the Yamaha editor sees both. On the JP app there are several slots that seem like there could be additional things the app could see but it never makes a connection through the iO dock to the Jupiter-80. I guess the issue is with the Roland app if someone is using the io dock as an interface for a Yamaha app and hardware piece.

Maybe an update from Roland??? But how many are really attempting the same thing to justify it?

I would love to use the iO dock, it fits perfectly in that big blank space to the right on the Jupiter-80. It would be great for liver performance to have all of the features of my iPad in a convenient utility package like the iO dock and its presentation looks nice. It would be convenient in the studio instead of having to constantly remove and replace the iPad from the iO dock to work between editing the JP and using the other apps in my studio.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 07:11
Also just thought of this tnicoson, if the iOdock was modded in some way, the camera connection kit would have to somehow be seen in the chain first by the JP-editor app before the iO Dock. I have know clue how.
The answer is on the software side I think.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 13:18
The only last alternative I have not tried is using wireless wi-fi. I wonder if it is possible to connect the USB Wi-Fi adaptor on the Jupiter-80 and then make a connection with the ipad first BEFORE starting the iO Dock.
I do not have a USB wi-fi adaptor to test this idea at the moment. I am aware of the latency involved with wi-fi. I am aware that with wi-fi, the iPad and JP-80 duo could only be used in areas where a wi-fi signal is present. In the Studio I would not mind those issues so much.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 17:27
Thanks, Synthtron - but I think I will just keep my roll of Duck Tape handy. I have a brand new roll - in black, no less, so at least it won't show too much. Don't need it quite yet anyway.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 18:05
I am looking into the wi-fi adaptor. It does not cost as much as I thought. Looks like it is around $50 US.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 19:22
You don't need to be in a wi-fi zone. The i-Pad and the JP-80 can make an ad-hoc wi-fi connection. It is not difficult to configure, and it is described step-by-step in the manual. I think it will be the solution that you're looking for.

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 21:24
Really? On Roland's site on the page for the wireless USB adaptor they state "In order for the mobile device to communicate with compatible musical instruments, you need a wireless LAN access point with an Internet connection."

Re: Alesis iO Dock and JP-80/JP Editor

22 Sep 2013, 21:36
I see it now on Roland's site pn how to enter ad hoc mode. This seems like a solutionto try,
thanks!

← Back to JUPITER-80