Fantom-S and Fantom-X

Tone Cycling, Multisamples, etc.

Tone Cycling, Multisamples, etc.

24 Jul 2004, 18:06
I read somewhere that the Fantom synth engine accommodates alternate triggering of tones, not just by velocity, but also in random or cyclic fashion, allowing a patch to randomly or somewhat predictably trigger the different tones automatically as one plays the keyboard. Is this so?

Re: Tone Cycling, Multisamples, etc.

24 Jul 2004, 18:34
Yes....Its not a great thing for a synthesizer of this calibre.

However, Roland does not, as far as i know, claim to have such a feature...anyway, we can use our creativity to do this...

for example, we can use LFO for modulating the AMP values for the 4 tones in patch.

Another method is to use a tone delay mode to trigger it after an elapse of time....we can use this to create a short anolgue delay too....

another method is to lay out the four tones in four different areas of the keyboard and use a random scale generator to play notes. However this may not be cyclic....if you want cyclic changes, as far as i know, LFO is the only way to do it...


depends on you...come up with something new....hope i helped...

Sambasevam.S


---------------------------------------------------------------
If at first you dont succeed, then skydiving is definitively not for you.

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 03:19
Sambasevam: you are wrong where you say Roland doesn't tell about it - it is there in the manual. Also, Lilody meant not LFO-based cyclic changes, but cyclic on key press.

Lilody: yes, this is possible in both patch and rhythm kit mode. For example, you can have four different percussion or hi-hat sounds on one key that would change cyclically or randomly as you press the key - this feature rocks.

As for other controls - the possibilities are endless. You can route ANY envelope or LFO or controller to almost ANY parameter like sample timestretch, effects parameters, envelope times, LFO rates etc. Read my tweakbook if you want to know what beasts the FS/FX series are: http://artemiolabs.com/?p=books/fsxtweakbook

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 03:31
Random scale generator? I wanted to know if velocity is the only way to switch among individual tones in a patch ( like the 4-way velocity switched piano), or if the Fantom can trigger different tones each time a new note is played, regardless of velocity...like automatically alternating up and down bow strokes or inhaling/exhaling harmonica tones. The vectoring stuff you threw in there works fine for synthesized sounds, but is pretty useless for solo acoustic instruments.

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 03:46
Thanks again Artemio. It seems you replied to my original post at the same time I was replying to sambasevam's. I can't wait to use this feature with my guitar, violin, and harmonica samples. Well, I suppose I'll have to wait until my FX7 actually arrives...

here's what i think.....

25 Jul 2004, 08:33
let me say what i understood from your last post...

you press a key and hold it and FS should automatically generate up and down bow strikes...right?? if thats the case....i think.....you can have three tones for a strings multisample and one tone for the strings multisample, but let it be something like an attack strings or something like that...


or...we can tweak all the four tones such that the tone 4 kicks in after some time....and the rest of the tones go on...

like...we can use the 16 STEP LFO and create a pattern like a square wave such that there is a negative amplitude for only a short time somewhere in the middle....however, with this the sound may sound broken or artificial...

one more idea(i guess..) lets set the AMP page such that the graph is something like :

1\
1 \_____________________
1
1
1
1
1
1
1


we can make this cyclic such that the attack is emphasised on the elapse of the specified time....this sounds more practical to me....




Sambasevam.S


---------------------------------------------------------------
If at first you dont succeed, then skydiving is definitively not for you.

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 08:48
i think you misunderstood me art....

Roland tells it in the manual...all the manufacturers tell each and everything in their manual.....what i was talking about was about mentioning it as a specific feature....like....

61 note polyfony with after touch blah blah blah....

COSM amp modeling ....

24-bit sampler......

16 velocity trigger pads with AT.....blah


like that ...thats what i meant .....anyway... :-)

Sambasevam.S


---------------------------------------------------------------
If at first you dont succeed, then skydiving is definitively not for you.

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 10:28
sambasevam:

Yes, I get what you mean. But then Roland would have to have a list of 200+ features which is not what they should do. In a press release, they usually put 6-10 most significant features, which is right.

You still didn't get Lilody: he meant the changes with TMT (tone mix table) not LFOs and Matrix Control. TMT lets you switch tones in a random or one-after-another order.

Sam: Artemio had it right

25 Jul 2004, 12:04
I did mean that I wanted a different tone to be triggered each time a new note is played. By "automatic", I mean the synth engine chooses the next tone to sound at the next played note. For instance, you play two middle C's, one after another, at the same velocity...the first plays an upstroke sample, the next plays a downstroke, from the same patch! I downloaded the editor software from Roland Canada, and discovered the Velocity & Keyrange page with Velocity Control at the top having 4 options: on, off, cycle, and random. Wish I'd found it sooner and saved you the trouble.

I do think this is a great feature, a rare one for hardware. But it does consume a hell of a lot of memory to have different multisamples of the same instrument, especially if they're only slightly different sounds. So I guess there won't be many presets using this feature, but that's okay, cuz I gotz my own samples.

Re: Tone Cycling, Multisamples, etc.

25 Jul 2004, 12:55
Oh ok...

So TMT does that....great....Thanks for the info...

There's a patch called SOUND ON SOUND, which makes use of this...and in one of my songs, i really wanted only a single tone, so i had to switch this TMT off.....really nice....

Oh, yes Art...u r right and thats what i meant...like claiming it as a new feature...thats why i said in the beggining that its not a feature to be raving about in such a wonderful synth...anyway...:-)


WELCOME ABOARD LILODY....(i thought it was a she not a he.. he he he)


Sambasevam.S


---------------------------------------------------------------
If at first you dont succeed, then skydiving is definitively not for you.

← Back to Fantom-S and Fantom-X