Jim -
I agree with you - given the feature set of this board, we need to get to the bottom of this problem. There are some hints in these forums that I've found - but nothing definitive yet. I am a relatively new board owner ...and despite all of the display issues I still went with this model. I crawled through the specs of all of the current gen workstations ...and to get a good sampler with audio recording and expandability you're looking at spending 3x-4x the price of the Juno G. I want to make this my song composition tool ...but to invest the time in getting past the learning curve I want to know it'll be with me for awhile.
There's a thread for serial numbers, but after reading through it, it shows a lot of serial ranges and China/Japan versions all appear to be affected ...except maybe ZX? There just aren't enough data points. This thread seems to be a decent compilation of DIY fixes/attempts/speculations. Let's keep it going and get to the bottom of this.
From a diagnostics perspective, there's a lot of good information here ...and I'd argue encouraging data. Mainly, the fault typically appears as intermittent for awhile, and in some cases repairable with simply reseating the cable. Also, some folks have noted that the failure can go away at lower temperatures. In either case, we seem to be dealing with a mechanical type of problem rather than a true electrical failure. It does not seem that the LCD itself is having the issue ...and we now know that Roland actually did revise their design to simplify the wiring to the LCD from the board. One concern has been that even replaced/fixed LCDs will fail in time. Perhaps this was because the original repairs were done with the old LCD design ...and the new one never fails? Can anyone comment on this?
I'd say the most frustrating part is that Roland undoubtedly knows the root cause, and has not shared it. They are (at least in the US) admitting fault and covering the problem outside of warranty. Given this, I'd really like to know what they found. Are there any Roland employees that are members of this forum? If not, maybe we can get to root cause. Since there are people out there with the problem and willing to go inside their boards, this is what I'd propose. For a faulty or intermittent board, start poking around with freeze spray. See if we can identify the region/connector/IC responsible. Ideally we find a location that we can freeze and get the board temporarily working again. Once we locate it, we spend some time coming up with a reliable fix. My LCD is still fine otherwise I'd be on this path already....
http://www.amazon.com/gp/product/B000Z99ZCA/ref=ox_sc_act_title_1?ie=UTF8&m=ATVPDKIKX0DER
Another thing to investigate, and maybe this really is the solution for everyone's problem, is this post from another thread. Can we get some other feedback from others on trying this fix? Thx sky5031 for sharing!
Roland made in china Juno G had a quality supplier problem, We have two of these keyboards at my church and both of them go out. The first one I replaced the display ($131.00) from Roland with there new revision "a"
replacement, worked,, displays fine. within about 5 weeks the second went out on the other keyboard..well
thought about ordering a second display from Roland,,still had the old display from the first one,,thought I'd
give it a try in the second one,,guess what it worked! I then looked at the cable on both of these displays and
found a quality issue with the cable..when the company in China pushes the cable in the socket next to the
display they are causing the contact fingers to become de-laminated from the ridged plastic backing
and peeling back when pushed into the connector,,what we see in the start of faded display or no display
in this case. I peeled back the contact on the second display and wiped a real small amount of super glue
under it and now it works just like it did before. I looked at the first display and it has the same problem
de-laminated contacts, If anyone out there is having this display problem look at the contact terminal on the
flex cable and see if they arent peeled back before you replace,,oh the first keyboard had the faded /half screen effect fyi-sky5031