Fantom-S and Fantom-X

What's so good about the Fantom X

Re: What's so good about the Fantom X

19 Mar 2004, 09:33
watch out for scams on reader ads BTW.
SOS are quite good in that they offer some good advice on this.

I don't know about the cards, I don't have either.

Look through the forum though, there has been plenty of discussion on SRX cards here. There is a section on Sound libraries and cards

Loz
The artist formally know as Lawrence
Loz

Just got my new Fantom S!

20 Mar 2004, 18:32
Well all - thanks for your advice... picked up my Fantom S from a guy I found on SOS website.

All is well - the keyboard is in immaculate condition and got it for £750. Seems a good enough price.

I can't believe the quality of the sounds: I thought they'd be similar to the XV5050 but actually there are loads of new patches and they are absolute bread&butter. Not a single useless sound. Very pleased with the kit drums and basses. And what a selection of Rhodes sounds!

Thanks for all your advice

Mat

Re: What's so good about the Fantom X

23 Mar 2004, 19:16
Dear all

Would just like to report back. It took me 20 mins to get sounds ready for a Sunday gig and I LOVE the new 'favourites' concept!.

I was a little worried that it would take me a while to get into the more advanced side of the Fantom (i.e. creating patches from samples/looping). I thought - "uh oh, bigger screen means more confusion" but The Fantom S has surpassed my expectations for simplicity of use.

I was pleasantly surprised by how easy it was to take a sample from my old D50 (Shakuhachi sound), loop it, apply LFOs, and sort TVAs and effects out. Didn't even need to look at the manual as it was all so intuitive (esp. if you've used Roland gear before).

And as for the improvements over Rolands XP60/80 - I don't know where to start! So many things that impress me (and I know I don't need to list them because you all know but I need to get it off my chest!):

* You set a patch names only when you come to save it
* Expected the menus and screen to be slow (ya know, like these new mobile phones...) but it's really fast
* The effects section is beautifully set out
* Even the main screen has so much info on it
* Love the way that the edit button toggles different views
* Haven't begun to look at the sequencer yet apart from seeing that you can record whilst keeping the rest of the screen there (i.e. if you are editing sounds! - wohoo)
* LCD contrast physical dial on front panel - GOOD IDEA! (better than previous Roland variations I have seen involving (a) having to go into a menu to change the contrast or (b) having to grope around on the back panel to find the dial!)

I only have a few questions about exporting or saving sound sets (can it only be done via USB to PC or can sound sets be saved onto PC card?), moving the location of user samples (i.e. if a sample is in position 8 how do you move it to position 2?), manipulating samples remotely (i.e. controlling Fantom from PC to operate on samples), and saving whole sets of sounds with samples (I am guessing this can't be done).... but I'm sure I'll find the answers with a little digging around. Possibly even in the manual, although I doubt it :)
Have already been reading it!

I have a few questions that arise from the article.

Am I right in thinking that when the Fantom starts up it loads preset samples (plus user samples) into the sample SDRAM (or at least can be set to do this)? This is what I gather from the Managing Samples section (Fig 2 - Sample Functions and Memory).

If you haven't upgraded and have just the 32MB of "sample SDRAM", then how does this fit all of the 64MB of preset samples?! That's the only thing that doesn't make sense to me.

Secondly, what is to be gained by expanding the "sample RAM"? By this I mean: at what point would you need to expand the memory? At the moment I'm struggling to see how the preset samples fit into sample memory let alone my user samples.... although I know both fit because I already have some of my own samples (in perm user memory) in there and they load fine.

So - what would I have to 'max-out' on in order to want to upgrade?

Thirdly, do you know the difference between SD, MMC, Smartmedia and CompactFlash memory cards? Would I be wise to invest in a 128MB (is this the max?) Smartmedia card - and if so where from?

One FINAL thing (I promise!!). The manual says something about pluggin an optional 3.3V power supply into the card slot. What on earth is this about?!!

Honestly - after this I've no more questions!!! And I shall be eternally grateful if you could answer :)

Re: What's so good about the Fantom X

24 Mar 2004, 04:01
Loading samples on startup is a system setting. You can turn it off and load them "on demand" instead.

The 64mb of waveform samples (piano etc) are not loaded into the sample RAM, but read from ROM.

The User samples (the vocals etc used in the demo songs) are loaded into RAM - but as above you can turn this off

The FS only accepts SmartMedia cards. The rest are similar, but different forms of flash memory, and not compatible (but can be used in the FX because you can buy various adaptors for the PC card slot it has)

The reference to the 3.3v is presumably just that you need to buy 3.3v SmartMedia cards (older ones came in different voltages)

Buy a 256mb PC133 DIMM to max out your sample RAM
Then a 128mb Smartmedia card to save them.
Back up from the SM card to your PC over USB.
Or buy multiple SM cards

You can buy a 128mb card from most reputable on-line retailers.
e.g. www.dabs.com has Fuji (quicklink code 1546WS) or Lexar ones for £25 inc VAT. (plus post). Don't pay any more than that. Don't worry much about "no name" brands either. Only Fuji and Samsung make them, everyone else just rebadges them.

Loz
The artist formally know as Lawrence
Loz

← Back to Fantom-S and Fantom-X