Fantom-S and Fantom-X

Microphone Input Volume

Microphone Input Volume

13 Jun 2008, 16:25
Hi folks, I'm a long time owner of a Fantom-X8 who is trying to record with a microphone for the first time, but I'm running into a problem.

I have my microphone connected to the mic input jack on the X8 via a female XLR to male 1/4" balanced cable, but even with the mix volume all the way up I can only BARELY hear the mic through the Fantom- this is with the input set to "Microphone" and yes, my mic is on :)

My microphone is not a condenser and it does not require phantom power; rather it is a unidirectional cardioid dynamic mic (it's not a Shure SM58, but it's similar). I believe my problem may lie in the cable itself- I haven't tried an XLR to 1/4" impedance matching transformer with a regular microphone cable yet but I will if no one else has any suggestions on how to fix my problem.

Re: Microphone Input Volume

14 Jun 2008, 05:00
Hope you pressed the "mix in" button...

Re: Microphone Input Volume

14 Jun 2008, 14:26
Of course.

Well I solved my problem. I bought an XLR to 1/4" line matching transformer from Guitar Center today and the microphone is working properly now.

Re: Microphone Input Volume

6 Jul 2009, 06:38
Hi Reuyl,

Could a line-matching transformer solve my hum problem? I am experiencing a noticeable level of hum using a SM57 copy and XLR to mono jack or XLR to balanced jack leads.

Thanks,

Sam.
Now is the discount of our winter tents.

← Back to Fantom-S and Fantom-X