Fantom-S and Fantom-X

Fantom X-Autovoltage?

Fantom X-Autovoltage?

28 May 2008, 10:16
Hi

I just got myself an X6 that's rated 100V but our household power is 220V.Is Fantom's pwr supply autovolt adjusting?

Thanks

Re: Fantom X-Autovoltage?

28 May 2008, 12:18
If you still have it in one piece (meaning you haven't plugged it yet) I advise you to return it asap and get the right one instead. I'm not an engineer but I'm positive about the fact a keyboard whose AC is 110 would NOT "auto-adjust" to 220 :)

Re: Fantom X-Autovoltage?

28 May 2008, 14:03
Their are converters you can get on ebay for about $10.
wudsiba
Fantom X6
Audio exp.

Re: Fantom X-Autovoltage?

28 May 2008, 14:54
The G manual shows all voltages
Power Supply
AC 117 V, AC 230 V, AC 240 V (50/60 Hz)
AC 220 V (60 Hz)

I will assume the X is the same- auto-switching

[edit] checked the X manual out and this is the same specs- did you not check the manual?
Sonic Cell User Group
http://launch.groups.yahoo.com/group/SonicCell/

Re: Fantom X-Autovoltage?

28 May 2008, 15:29
I dunno about the G but on my Fantom X back (it's preferable to check the piece of hardware instead of the manual, trust me) it says: AC 230 V, 50 / 60 Hz. And it's made in Japan, although I'm living in Europe and got it delivered here by Thomann (a German company).

Re: Fantom X-Autovoltage?

29 May 2008, 03:48
The reason why I have this seems "stupid" question is that I owned a Korg Extreme. It's indicated as 100V but you can plug it to 220V with no problems at all.No frying whatsoever... This is the reason why I am wondering if the Fantom is the same.I checked the Power board inside and fuse is rated 250V but I don't want to take a risk that is why I am asking around.

Re: Fantom X-Autovoltage?

29 May 2008, 07:40
One of the GREAT things Kurzweil has ALWAYS offered is a simple switch and input to convert from one voltage standard to another. I think this is a nice touch that all the manufacturers should adopt.

As for eBay, I wouldn't trust something like a voltage converter I could buy online for any of my gear. I would advise going to someone local like a keyboard tech, electronics expert, or a VERY good master electrician.

Of the seven hardware synths I own, only the Kurzweil allows the ability to change voltage.

I haven't checked my X8 manual, but I would contact Roland even if the manual DID say there was a way to do it. In these tight economic times, you don't want to fry your synth just because a manual says so. Get the NAME of the tech that told you it can be done.

Best,
Vlad
"Turn off your mind, relax and float downstream" - John Lennon "Tomorrow Never Knows"

Re: Fantom X-Autovoltage?

29 May 2008, 10:09
This has already been discussed HERE and HERE

Yes, you can use your X without the need for any external switching or a adapter.

yes it does

1 Jun 2008, 14:34
I bought my X6 in the US and live in Europe (Sweden) with 220 v and it works just great (auto adjusting).

//Daniel

Re: Fantom X-Autovoltage?

3 Jun 2008, 04:03
i bought my fantom xr from ebay. i live in europe, and it did auto-switching to 230v with no problems whatsoever. I own it over a year now. Kurzweil SHOULD have adopted this technology in their monster k2600 tanks, as you do not find anything re-voltage switching in their manuals except of 'contact your kurzweil authorised dealer'.

← Back to Fantom-S and Fantom-X