Fantom-S and Fantom-X

Modifyng midi with fantom x

Modifyng midi with fantom x

4 Jan 2008, 17:05
Hi everybody, I looked into the previous thread, found a .pdf about modifyng midi which helped me a lot, but still I cannot reach my goal and need help. I am working with my fantom x7 that I owned since one month.

Problem as follows: I want to modify sounds of a midi. I loaded the midi, made all my changes to the patches, erased all the control change that recalls the general midi bank as well as all the program change numbers. Ok. After that I saved the song as .smf type 0. I understood that working in this way also the specific parts should be saved as a sort of performance, which will be loaded together with the song.

I reloaded the song, everything lost !

Why is it happening ? I am probably missing some important basic point here. For instance: is the selected performance that is ruling the song, or the other way around ? My goal would be that when I made all my changes and load the song: I shouldn't do nothing more than play. Can you help me ? Thanks in advance ! Claudio

Re: Modifyng midi with fantom x

4 Jan 2008, 18:34
Midi format 0 only supports one track Midi format 1 supports multiple tracks. Check out http://www.vlsi.fi/appnotes/usable_midi_formats.pdf for more info. Also check out page 200 in the manual which states:

Format 0:
Convert the song to a Format 0 Standard MIDI File
(all performance data is saved in one phrase track)
and save it to disk. An extension of “.MID” will be
added automatically.
Format 1:
Convert the song to a Format 1 Standard MIDI File
(performance data is saved in more than one phrase
track) and save it to disk. An extension of “.MID”
will be added automatically.
---------------------------
When most people go to work they work. When musicians go to work they play. Which do you prefer?

Re: Modifyng midi with fantom x

4 Jan 2008, 18:42
Hello Grabwave,

If I understand your post correctly, what you really want to do is to save your song/file as an .SQV, which is the default file type for the Fantom when you select 'Save Song'. This saves all of your changes, tweaks of Patches, and the Performance associated with the song.

Then you just load and play. . . . .
Bassman

Re: Modifyng midi with fantom x

4 Jan 2008, 20:57
Yep ! Newbie from me !!! Formulating the question the solution came also to me. I 'don't like to use .sqv because I swap files also with other systems, but that solved the matter. Maybe a more sofisticated question about same subject: I use to create medley: so in the same song I'll need to use different sounds for the parts I play. How can I do this ? Do I have to change the performance or can I give a command to the midi or .sqv files so that changes autmoatically at the right moment ? Which command should it be than ? Thanks !

Re: Modifyng midi with fantom x

5 Jan 2008, 00:23
I'm not at my Fantom, but I can get you real close to doing this. If you try this at your Fantom, you'll probably be able to get it. . . . . . .

Three commands need to be inserted in the Part in order to change Patches: MSB, LSB, and Program Change.

MSB and LSB are CC (Control Change) Midi messages.

MSB is cc# 00.
LSB is cc# 32
The next entry needed is a Program Change.

If you look at the Patch List and select a Patch, each Patch has the MSB, LSB, and Program Change numbers displayed at the bottom of the info provided.

To insert this into the event data for a Part:
Press the 'Song Edit' button.
Select F8, 'Micro Edit'.
Make sure that you at the measure or point in the Song where you want the change to occur.
Select F1, 'Create'.

From the pop-up, choose either Control Change or Program Change. The order doesn't matter as long as you enter them sequentially. Execute the command and you'll see a line with the command inserted in the event list with default values. Cursor up or down to this command if it isn't already highlighted. Then use the left/right cursor to move to the needed fields and put in the required data. Do this for the MSB, LSB, and Program Change numbers you need for each Patch.

Give it a try and if there are questions, ask. Give a description of what you tried. Hope this helps. . . .
Bassman

Re: Modifyng midi with fantom x

5 Jan 2008, 12:36
I'll try soon. Looks very promising. Thanks a lot bassman !

← Back to Fantom-S and Fantom-X