Studio Zone

Micro-BR converting my recordings to MP3

Micro-BR converting my recordings to MP3

23 May 2007, 08:15
Hi.

I'm new here, great source of info. Here's my problem that I hope someone here can help with:

I have a Micro-br (3 weeks) and it's a great piece of kit. The manual is written by a madman though, but I can work out most things eventually.
I am not doing more than simply recording 4 tracks and rhythm at the moment and haven't got to use V-tracks at all, mostly because I'm lost, but my main problem is converting my 4 track songs (i.e. just using tracks 1-4) into MP3 to save on my PC for posterity. I've read the manual and tried bouncing as described but I don't get all tracks bounced. I'm sure it's user error as the terminology and instructions are baffling me.
Can anyone write an idiot's guide for lesser mortals like me that I can print out and follow step by step. I'll do it once and I'll be fine.

A free pint at my local awaits the first one to help this old geezer out.

Regards

Spike
Fantom G7, Korg M3, Motif XS6, Tyros 2, Fostex MR16 and empty bank account

Re: Micro-BR converting my recordings to MP3

24 May 2007, 16:03
I do this by mastering instead of bouncing, but I think you can do it either way.

The first thing to do is make sure you have your track selections, levels and panning the way you want them. In other words, when you play back your song everything sounds the way you want it to.

Then press Mode (Exit and Utility at the same time) a couple of times to get into Mastering mode.

Then cursor over to the top right of the first line of the display and use +/- to select the tracks you want to master (bounce) to. I usually use something like 12V8 or 34V8 because I never seem to use that many v-tracks. This assumes you are going to stereo. You can just use a single track if you want mono. You have to set both the track and the V portion ... make sure you pick something that doesn't have anything recorded on it or you will overwrite it.

If you want to, you can add some Mastering effects at this point. I haven't tried very many of those yet.

Next press Record, then Play.

Press Stop when the song ends. It will prompt you if you want to export. Respond YES and choose MP3. (It will assign a default name which you can change then or later.) Choose EXE and it will export to the MP3 folder. When it's finished, you can go into mp3 to listen to it.

(I'll have a lager ;-)

Re: Micro-BR converting my recordings to MP3

26 May 2007, 18:03
Many thanks Groovey1. Much appreciated.

I was up till 1:30 this morning writing down the various ways I was trying to interpret the manual. I'll give your instructions a go in a day or two (I need a break or I'll fall out of love with the little marvel) and let you know how I get on.

Have you experienced the "Drive busy" and "card read" error messages? This happened with the original card and now my new 1GB card is practically unuseable with the same messages appearing when I am trying to record or during my attempts to transfer to MP3. I got another 1GB Sandisc card today (it's starting to get expensive) and hope this one is OK but haven't tried it out yet.

I'll initialise the Micro-BR with the new card in it. Hopefully it is just a card issue but maybe a system restore will help as well. Perhaps I should post this elsewhere on the forum (thinking aloud).

Cheers (your pint is poured and waiting for you at the Miskin Arms, or at least it was the last time I looked).

Spike
Fantom G7, Korg M3, Motif XS6, Tyros 2, Fostex MR16 and empty bank account

Re: Micro-BR converting my recordings to MP3

29 May 2007, 13:02
I've never seen either of those messages. I notice the manual talks about too much or fragmented data in the case of the busy message, or possibly a slow-responding card. I've had good luck with regular (not high-speed) Kingston 1BG cards. They seem to sell for quite a bit less than the comparable Sandisk (at least here in Canada).

Re: Micro-BR converting my recordings to MP3

4 Jun 2007, 18:03
Hi Groovey.

Update on my efforts to transfer to MP3. I can do it either by bouncing or by using the mastering functions following your easy instruction below, but I'm still not entirely happy with the sound balance. I seem to get either too much volume of track 1 and 2 or too much of track 3 and 4. If I have recorded 4 tracks don't I need to transfer tracks 1 and 2 to 1 V track and tracks 3 and 4 to another V track to create a stereo MP3? Sorry I'm so thick it just seems odd that I use 1-4 tracks then seem to transfer just 2.

I guess I just need to play with it some more, trouble is I have a few songs and just want to get them down without too much fuss, and I ain't got much patience.

One thing, I have seen a post somewhere that says how to reduce the rhythm (drum) volume. I find that my MP3 transfers have the drums far too loud. Any idea how to reduce the volume?

Re my card errors, I initialised the Micro and the latest (Sandisk) card I bought is better but as I write this, I have just had the Drive Busy message when I am mastering a song. It's probably me and I'll stick with it. Thanks for the help.

Spike
Fantom G7, Korg M3, Motif XS6, Tyros 2, Fostex MR16 and empty bank account

Re: Micro-BR converting my recordings to MP3

5 Jun 2007, 18:01
Hey Spike ... glad the instructions were of some use. If you're listening to the results in mp3 mode, it should sound just the same as it did when it does in the multi-track recorder. That's why you should start by adjusting the levels, etc. before you start bouncing or mastering -- do the mix first.

If you're playing back the bounced tracks before exporting (ie: in recorder mode) you need to make sure you turn off all the tracks except the two you have bounced to (or one if you're doing mono). The manual suggests you turn their volumes down to zero -- I find it easier just to switch them to empty v-tracks. If you don't do this, you'll be hearing both the original and the bounced copy at the same time and they will sound too loud.

To give an example: let's say you have recorded the 4 tracks : 1v1 2v1 3v1 and 4v1. You set your levels and maybe pan a couple of the tracks to give a bit of a stereo image. You then bounce all 4 of these tracks to 12v8 (that is: 1v8 and 2v8). When you want to play back the bounced tracks, set your tracks to: 1v8 2v8 3v2 4v2 (assuming 3v2 and 4v2 are empty). That way will only hear the bounced tracks and not the original. If you are bouncing the rhythm as well, make sure you turn it off before you play back or you will hear it twice.

Regarding the rhythm volume ... if you press Rhythm you should see "Rhy Level" where you can adjust it.

Re: Micro-BR converting my recordings to MP3

5 Jun 2007, 18:32
Groovey1.

That sounds like a great set of instructions and would explain the muffled, distorted sound I've got on some occasions, I nearly understood every word even without the Micro on my lap. Brilliant. I'm away a couple of days but will do as you say (literally) over the weekend and I'm sure I'll get there. I used your previous instructions tonight on a couple of old songs and it worked nice.

You'll hear the screams from your place when I try multi tracking and doing complicated bouncing, but I think your instructions above are all I need.

As for the Rhythm level. Of course!

Honestly, your help is appreciated.

Cheers

Spike
Fantom G7, Korg M3, Motif XS6, Tyros 2, Fostex MR16 and empty bank account

Re: Micro-BR converting my recordings to MP3

24 Jun 2007, 16:21
Groovey1.

Just an update. Thanks to your idiots guide above I can happily record and convert. OK I'm not doing any serious mastering other than setting track volume etc but have a few toons sorted and another will be emailed to a mate in the next minute or two.

Your lager was getting warm, so I drunk it.

Diolch yn fawr.

Spike
Fantom G7, Korg M3, Motif XS6, Tyros 2, Fostex MR16 and empty bank account

← Back to Studio Zone