drh

Have you tried turning off the tempo override? (under Menu - System - Sync/Temp)

You might like to have a look at this thread. I'm assuming you've formated the card using the Fantom. http://forums.rolandclan.info/index.php?action=show_thread&thread=8768&fid=1&page=1

This may or may not help. Got the advice from a kind Clan member some time ago. Thread presumably now expired. I was asking about incorporating fade/decay into the damper pedal on string / brass sounds, as opposed to sus...

Understod. It is truly a pain when something like this goes wrong. All the best for Tuesday.

Well if the slot is distorted in some way, replacing it is probably the best option, using a local Roland recommended technician, unless you're confident about doing the work. I've found that sobbing hysterically when s/...

Have you decided that very important question of whether you want a workstation or an arranger keyboard??

I have 4 SRX cards installed and CF card works fine. Sounds ike coincidence to me but if the problem persists you could remove the SRX and see if CF card function returns. But can't see why this would be the case.

Loaded the file to PC card adapter, then Fantom didn't register it as being on the card. Tried shortening the name in case this was relevant but still no joy.

I'm assuming you have the ProTools output assigned correctly to the speakers?

Worth checking in microedit mode that all 'Hold on' commands (end in 127) have a corresponding Hold off command (end in 0). Also that note duration values are as they should be. I find these are sometimes corrupted in ed...