kiskadar69

https://drive.google.com/drive/folders/1FpT7U6yH54XpEX3nXX4icG-NoGbSrPF8

Tip 2. If programming from the panel seems complicated, try Jeff Glatt's "Roland A-30 Patch Editor": http://midi.teragonaudio.com/progs/software.htm

I have uploaded some files related to the Roland A-30 to the following link: https://drive.google.com/drive/folders/1HckS5WJzSuWtLyroI-ImZkDpyYQa-Pnp

Roland A-30, Programming MIDI channel Step 1. Make sure that the <PATCH> button LED is lit. Select the A-30 Patch (1..32) you want to modify. The contents of the Patch are copied to the "temporary" memory. Step 2. Make s...

I don't have a Roland JV-880. Tip 1. Set System / MIDI / Rx Switch / Control Change parameter to ON. This parameter determines whether or not the JV-880 responds to Control Change messages other than modulation, volume,...

For testing, I have produced these SysEx messages for you. I don't have a JV-1010, so you'll have to try it yourself. If you use Windows, I recommend Bome Send SX. User Performance 01, Part 01 Off: F0 41 10 6A 12 10 00 1...

"is there a 16MB card by now?": there is no such thing. The original Roland SR-JV80 cards have a maximum of 8MB of physical memory, and the Romulator cards simulate this. The 01..19 cards have four 2 MB mask ROM chips. T...

I don't have a Roland JD-990 either. I don't know exactly what you want, but I've uploaded some .SYX files to the link below: https://drive.google.com/drive/folders/1Do7JqsX0sYzFOQExMXIeZNRDpviIIzCs

Tip 1. The problem may be caused by the MUTE GROUP parameter for hi-hat tones not being OFF. To test this, set the MUTE GROUP parameter for hi-hat tones to OFF. Tip 2. What is the firmware version? You can check it by ho...

Firmware updates for Edirol by Roland PCR-300/PCR-500/PCR-800 can only be done via USB and only on a computer with the Roland driver installed. https://drive.google.com/drive/folders/1_vha37_KR5uu-3mZxAMyPm7dHSpFm5A1