KDub

There is no pattern chain feature. But each pattern slot has two alternate patterns (A & B) and the TR-8 can be set to automatically cycle between both of these. That's in the manual and you can see it done on various Yo...

Yes the clocks will sync.

Does it light in screensaver mode?

It is true you loose your multichannel by routing the TR-8 digitally through the MX-1. Personally I don't do the discrete multichannel drum thing but I do host the TR-8 on the MX-1 USB hub and also run TR-8 assignable ou...

It's kind of like a 606+ with the addition of compression and other available tweaks offered by the TR-8 controls and effects. I really like it a lot. https://soundcloud.com/kdub101010/wreck-the-place

Analog input to digital output converter. https://www.amazon.com/gp/aw/d/B0055EBH5S

I haven't tried yet but in the MIDI implementation doc downloaded from the Roland site it indicates all available CCs are transmitted and received in both Mixer modes. There are quite a few so you'll probably want to go...

TR-8 is great but you already have a E2. I think you'll appreciate the interactivity you get with the MX-1. Had EMX1, ESX1 and E2. Miss it and looking for a Electribe Sampler now.

Nevermind I don't know how I glazed past that in the MIDI implementation chart. I guess I confused myself by setting the Din out to thru. No note data processed/relayed other than at the Din out when set to Thru. RTFM

Am I correct in assuming that a MIDI controller/sequencer plugged into MIDI Din is only able to send MIDI clock to Aira devices plugged into the Aira-specific USB hub? Does the MX-1 relay any other incoming messages to t...