Fantom-S and Fantom-X

Help - mixer sliders moving on their own

Help - mixer sliders moving on their own

15 Sep 2005, 09:55
Through a long story, my FX remained in a hot garage for a couple of weeks before I found out about it.

Anyway, I got it back inside but I am having difficulties with it now.

First, the Volume sliders for channels 1,2 and 4 will go up and down for no reason. It seems to be triggered by playing the keyboard along with what has been previously sequenced.

Also, there is a clicking or popping sound that happens when you play some instruments.

I'm just sick about this. Any thoughts (other than to kill a certain family member that left it in their garage)?

Re: Help - mixer sliders moving on their own

15 Sep 2005, 10:39
Hi bigbarry, just last night I was playing on my X8 in my home studio, switching between piano and elect. guitar patches in patch mode and all of a sudden the keys started playing drum sounds!! To make a long story short, the problem ended up being the fact that Sonar (the software program) was screwing up and feeding back into my mixer and speakers, (MIDI out of the X8 to the computer, and audio out of the computer back into my Alesis mixer.

Bottom line suggestion here is to do the following:
1) Power down your FX
2) DISCONNECT EVERYTHING from your FX except AC power and audio out.
3) Remove all expansion SRX cards and expansion memory that you may have installed.
4) Power up your FX
5) Do a factory reset.
6) Go into Performance mode, record a few bars, set it to loop, and get it playing back in loop mode.
7) Verify that those volume sliders are staying put.

The odds are that there are some CC or SysEx commands in what was previously sequenced causing the sliders to move.

Good luck, and keep us posted on the eventual solution to your problem!!!

---------------------------
Learning to play like Sponge Bob !
---------------------------
When most people go to work they work. When musicians go to work they play. Which do you prefer?

Re: Help - mixer sliders moving on their own

6 Dec 2009, 20:33
Hey,

A couple of years ago I had the exact same problem. After lots of troubleshooting, we found that it was the "pots" of the Realtime Control knobs. The potentiometers go bad and it will automatically change the volume sliders. On my X6, it had 1,2 and 4 bad. Luckily, my X6 was under warranty and got replaced.

Re: Help - mixer sliders moving on their own

6 Dec 2009, 21:05
I had the same thing as gilbertofx - both on a previously owned Fantom-S, and my current Fantom X6 - my local tech told me he has seen this numerous times over the years, and he has to resolder the connections for the knobs. He also said that this can be caused by the ribbon cable being loose.

When I got my recent X6, I was playing and all of a sudden the resonance of the patch started going nutz - I laughed, cuz I knew what it was, and confirmed it by going to a performance, and watched the volume of #2 move randomly up and down. (Knobs were assigned to 1-4, and #2 was the same knob that was previously assigned to the resonance of the other patch.) If you go to the mixer screen and see the volumes of the parts the knobs are assigned to moving (any of them) but not the other parts, I would guess that this is the problem.

~ric

← Back to Fantom-S and Fantom-X