Fantom Guitar

I have the xa, and it has that patch-stock. Couldn't tell you the name though because I heard it while going through all the guitars in the category, but can assure you it's there somewhere.

I think it's user 007 or 008 on the X, but for some reason, I don't get the fret noises on my unit. I'm wondering if it is because of the sustain pedal I am using: It is a simple on/off without the half-pedal. Could anyone confirm this?

Radon_22

"The brain is a wonderful organ. It starts working the moment you get up in the morning, and does not stop until you get into the office" - Robert Frost

i think you have to have the continous pedal hooked up.
and set up right.
when you let go of the pedaL sustaining notes you get a slight fret noise. hope this helps

The fret noise is on wave 4 of the FlamecoGt (factory settings, first acoustic guitar user preset, nr 8 or 9 I believe). If you check its patch settings you'll notice these settings:

TMT, lower velocity; 120,
so you'll have to hit a key quite hard to actually hear it when releasing a key (default is 0, max is 127). Lower this value to increase your odds

Additionally, it's only audible between C3 and C6, its TVA level is set to 87, and unlike the other 3 waves the wave gain is left on 0. So the sound is also rather soft, too.

I've cranked up the odds and volume a bit on this sample, you should be able to hear it now
http://www.xs4all.nl/~peterned/fx7/flamencogtmod.mp3

Peterned,

You rock! By lowering the tmt lower velocity a bit, I finally came up with the "sloppy" sound I was looking for. I guess someone had changed it at the store I first tried the fantom at.

Once again, thanks a bundle!

Radon_22

"The brain is a wonderful organ. It starts working the moment you get up in the morning, and does not stop until you get into the office" - Robert Frost