Fantom-S and Fantom-X

Pictures inside my Fantom X7

Pictures inside my Fantom X7

26 Jan 2005, 17:18
OK guys,

I recently took off the bottom of my X7 to investigate why my screen was not working. It was a ridiculously simple fix in that a cable had come unplugged. Of course, there are almost 40 screws to remove to get to the bottom cover off.

Anyway, while I had it off I took a few pictures in case anyone wanted to see what it looked like. Of note are the expansion slots.

Here are the pictures:

Of the cable that was unplugged that cause my screen to not work:

http://choirmember.com/images/cable-unplugged.JPG

and after it was plugged in:
http://choirmember.com/images/cable-plugged.JPG

The expansion slots, located under the small panel. You can remove the small panel easily without having to take the rest of the cover off:

http://choirmember.com/images/expansion-slots.JPG

And then sort of a panaramic view, starting from left to right:

http://choirmember.com/images/right-x7.JPG
http://choirmember.com/images/middle-x7.JPG
http://choirmember.com/images/left-x7.JPG

Re: Pictures inside my Fantom X7

26 Jan 2005, 17:39
Superb post... thanks mate. I spotted the few cost-saving build features... the expansion board is a Fantom-S board, and anyone else note the 1 octave "tagged-on" resistor ladder board to save making a 5 and 6 octave ladder? I wonder if the X8 has 2 of these "tagged on" boards?

Thanks for sharing.

Dave

http://www.drstudio.demon.co.uk/ "Some musicians have a physical block, some have a mental block, while others have a wooden block". Unfortunately, I'm in the 1st category!
Dave

:: http://www.drstudio.demon.co.uk/ :: http://www.myspace.com/daveboulden ::
"Musicians fall into three categories: those with a physical block, those with a mental block and those with a wooden block". Unfortunately, I'm in the 1st category!

Re: Pictures inside my Fantom X7

27 Jan 2005, 03:50
bigbarry: Thanks for the pictures.

dboulden: I don't think so, but maybe. There's no 5 and 6 octave keyboard with "heavy" keys (to my knowledge that is ;-). I've had an A-90 and opened it up like a thousand times to replace keys and the like. The X8's keyboard will probably be similar allthough it's a newer generation.

Regards,
Laurenz Nitert
Regards,
Laurenz Nitert

_____________________________________________________________________________________________________
Goodiebag: { Live 2.0(svq, doc) | Vilter Pads(svq) | RPS Status(zip) | XV5080(zip) | Fantom X + V-synth | mp3 }
[img]http://www.nitertautomatisering.nl/fantomized/lazeeboy.jpg[/img]

Re: Pictures inside my Fantom X7

27 Jan 2005, 10:59
Well noted about the ladder board Dave! This would have been an 'invention' of maufacturing engineers to reduce manufactiring cost of the unit, but ironically it would increase the part count per board which gives harder logistics and more complex assmebly - which increase cost. They must have done their figures though. And no, I'm not taking apart my X8 to find out!

I have a very sneaky feeling that the original X (first produced X's) had the same processor as the S or even the FA76 that produced the sound problem with the mobo's - simply not enough processing power for the increase in functionalty and colour graphics. So it may not just be the expansion board that these two units have (or had) in common.

Thanks for the pics bigbarry.

Steve

Re: Pictures inside my Fantom X7

28 Jan 2005, 02:07
anyone up for a little circuit bending :-p
its not the size of your kit, its what you do with it!

pictures X7!!!

28 Jan 2005, 16:23
Thanks......I'm affraid to open my X7
Do you have more pictures?
Or greater?

please post them......they are very nice!

thanks,

rob

Re: Pictures inside my Fantom X7

16 Aug 2005, 07:39
Big Barry - when you opened up your fantom did you find that one screw was longer than all the others? If so - which hole is it meant for? I removed my bottom panel to tighten one of the side panels and have put it all back together but am not sure that I put the longer screw in the right place - any help would be appreciated :)

Padraig

I hope you find the real screw!!!!

16 Aug 2005, 07:41
Wil you please make some pictures of the INSIDE fantom for me?
Can you send them to me?

greetings and I hope everything with de Fantom will be oke!!!!



rob

fly inside the fantom x8

24 May 2009, 08:40
Hey my look at the pictures on your posting pictures inside my fANTOM X7 using the link took me to a defunct for sale choir member gospel music site.Can you repost the correct link so i can check them out.THE REASON BEING AND I KID YOU NOT.I was on my fantom x8 the other night.When a sort of fairly large fly landed on the keyboard.Rather than sort of risk swatting it i stopped playing in the hope it would fly off.But lo and behold it headed between the keys and into AND INSIDE the keyboard.Immediately i switched it off.I couldn,t believe my eyes as it seemed way too large to get through the gap but was i guess 10mm large and slim.So now i,d like to safely access inside my keyboard ang give it a bit of a cleaning inspection.Anyone know how best to gain safe access to do this?

← Back to Fantom-S and Fantom-X