D and U series

D-110 volume pot and knob - spare parts required

8 Aug 2019, 04:51

I recently acquired (for free!) a fully-working Roland D-110 module. Its volume knob was missing and, on closer inspection, the pot stalk had broken off too. I've contacted Roland US and a UK-based engineer to see if the replacement parts can be sourced. Syntaur sent me a replacement knob but I'm still looking for the pot assembly. If you know of any around, please give me a shout. Cheers.

Re: D-110 volume pot and knob - spare parts required

29 Jun 2022, 16:00

Replacing this part on the D‑110 is very easy. It's a "Drop‑In" part and no modifications are needed. Just unsolder the old potentiometer and pop in this replacement. It's a 50K Ohm Dual Gang Logarithmic Taper and is available from Mouser for only $3 (USD)

Mouser P/N: 652-PTD902-2015KA503 --> P/N: LINK
Bournes P/N: PTD902-2015K-A503

I've added some notes about replacing this part at the end of the D-110 Battery Replacement Guide webpage at this link
http://llamamusic.com/d110/d-110_battery_replacement.html#VOLUME

← Back to D and U series