Start the SonicCell (SC) and select a problem patch.
Start the SC editor on your computer (it should be on PATCH) and select COMMON + MASTERING.
On the drop down box on the right called SYSTEM CTRL SRC 1, it is most likely CC01:MODULATION, select 00:OFF instead.
Play the EWI. Does that fix the problem ?
If it does, you should change the the breath settings on the EWI (I only have a EWI4000 so can't help you there)
Another way to check would be if you have a PC.
Get a Program called MidiOx, install and run it.
Go to Options / Midi devices and select the Midi Input device that connects to your EWI to your PC (perhaps you use the SonicCell as a Midi Input device?)
Make sure the Midi Input window is visible (View / Input Monitor) in MidiOx.
Play the EWI and the Midi coming out of the EWI should be displayed.
When you blow there is a lot of Midi data pouring out of the EWI and you need to know the Data 1 (Title on the top of the Input Monitor window) value.
As I said before this could be CC:Modulation (as displayed in the Event column).
If it is, you either need to change this to CC:Breath controller which is CC2 on the EWI, or set up a data map in MidiOx.
You might like to have a look at the Yahoo Groups
https://groups.yahoo.com/neo/groups/windcontroller/info
All the best
Royce