Two issues
9 Nov 2010, 18:30Hi forum people,
first i want to mention that there are problems on mixdown in the G using Mastering.
Mastering brings the existing audio-playback fast to the clip-limits and we get very fast an overmodulation.
It would be nice to have a possibility to avoid such bad behaviour, with a very good limiter with oversampling f.e.
For the mixer-Interface i miss the "Master Volume" for all outputs, means before the whole stuff is going into effects and mastering, in order to have a manual limitation possibility, without break individual parts-mixing configuration.
Second problem i experienced, is, that the USB-connection (in normal data mode, not usb-audio) with the Computer is disturbing in the Fantom G. This is minimal. BUT if you use the Mastering Effect and put up Levels of High, Mid and Low, it is gained very much and very present. It would be good to have a suitable solution fot this :-/
Hope Roland reads this Forum carefully and helps out,
Best Regards,
Tobias
first i want to mention that there are problems on mixdown in the G using Mastering.
Mastering brings the existing audio-playback fast to the clip-limits and we get very fast an overmodulation.
It would be nice to have a possibility to avoid such bad behaviour, with a very good limiter with oversampling f.e.
For the mixer-Interface i miss the "Master Volume" for all outputs, means before the whole stuff is going into effects and mastering, in order to have a manual limitation possibility, without break individual parts-mixing configuration.
Second problem i experienced, is, that the USB-connection (in normal data mode, not usb-audio) with the Computer is disturbing in the Fantom G. This is minimal. BUT if you use the Mastering Effect and put up Levels of High, Mid and Low, it is gained very much and very present. It would be good to have a suitable solution fot this :-/
Hope Roland reads this Forum carefully and helps out,
Best Regards,
Tobias
______
//\//
//\//