Fantom-S and Fantom-X

Arp + RPS ... this sucks!

Arp + RPS ... this sucks!

25 Dec 2003, 07:01
You can't synch the Arp to the RPS without the sequencer running. Argh. What gives?! I just wanted to run a little drum loop triggered off the pads via RPS and synch it with the Arpeggiator, and I had to make an entire sequence out of the drum loop to pull it off. That is silly. Doesn't the Triton do this?

It seems silly not to have the arpeggiator not synch to RPS when it's running. There should be an option for this.

Silly Roland!

Re: Arp + RPS ... this sucks!

26 Dec 2003, 16:03
What do you mean by not synching?
Tempo wise they are both running off the same timing
Loz

Re: Arp + RPS ... this sucks!

29 Dec 2003, 18:24
They are running off the same tempo, but try it, start an RPS groove from the pads and then hold down the arpeggiator. They're not in sync. The arpeggiator ALWAYS starts from when you press the first key, unless the sequencer is running.

Re: Arp + RPS ... this sucks!

29 Dec 2003, 18:44
Some might argue that is what they would like to happen.

How can the FS tell that it is supposed to start the arpeggio at some point other than the beginning?

There is no relationship between arpeggio length and pattern length - either can be any length you like. If you had a 32 beat arpeggio and a 24 beat pattern where would you suggest the FS starts the arp if you pressed the key half way through the pattern?
I guess it could be done if you chose a pattern and arp of the same length, or one was equally divisible by the other. But this is often not the case - there are plenty of 2 or 3 beat arps for example.

The obvious, though not perfect, solution is to simply play the keyboard to start the arp at the right point, so they are in synch.

Why is it a problem to have the sequencer running?
Loz

Re: Arp + RPS ... this sucks!

31 Dec 2003, 07:46
>> Why is it a problem to have the sequencer running?

It's really quick and easy to start an infinitely looping RPS pattern. I'm not even sure the sequencer will do infinite looping, and because it seems like something logical to me, in that there doesn't seem to be a need for multiple clocks. Hell, if they're both (RPS and Arp) forced to one tempo, why not a single, synched clock too?

I'm not asking that the Roland engineers figure out the right place for a 2/3 arp to start in the middle of a bar... just that when my key goes down, that the first and subsequent notes of the arpeggiator are synched with the pulses of the RPS.

Sigh. My next project is to get the Fantom-S to synch with a drummer by means of a Red Sound Micro Sync =)

Re: Arp + RPS ... this sucks!

31 Dec 2003, 08:25
The sequencer WILL do infinite looping
There isnt multiple clocks, only one.
They are synched all to it - but the resolution is very fine of course.
What you really mean is that they should be synched on the same beat, not 1/400th click of it.
Which is what will happen if you have the sequencer running.

So, again, not sure why you see the sequencer running as a problem - particularly when it enables what you want to do!

Did you read my tutorial on RPS btw?
http://www.wilkesworld.co.uk/fantom/roland_fantoms_tutorial%20RPS.htm
Loz

← Back to Fantom-S and Fantom-X